Description
Cordless earth auger with a brushless motor for drilling holes in the ground
With the Einhell GP-EA 18/150 Li BL-Solo you can drill holes up to 150 mm in diameter into the ground. The tool belongs to the Power X-Change battery system, so an 18 V battery of the same system from other Einhell tools fits it. The cutting blades of the supplied auger are replaceable.
Speed settings and reverse
The switch on the motor unit selects two clockwise speed settings or counter-clockwise rotation, marked ECO POWER, HIGH POWER and REV. The motor unit has two handles for holding it with both hands.
Accessories and mixing building materials
A 120 mm auger and a 1 m extension, sold separately, fit the same M14 mount. With a separately sold stirrer and adapter the motor unit mixes mortar, plaster and other liquid or powdery building materials.
Using the cordless earth auger
Remove the battery before fitting the auger. The auger goes onto the mount of the motor unit and is locked with the folding split pin. Hold the tool with both hands while working, with your right hand on the operating handle. The tool starts when you press the safety lock-off and the on/off switch together, and stops when you release the switch.
Cleaning and storage
Remove the battery before cleaning. Keep the air vents and motor housing free of dust and wipe the tool with a clean cloth or blow it out with low-pressure compressed air; the maker recommends cleaning it after every use. Clean it with a damp cloth and a little soft soap, as cleaning agents and solvents can damage the plastic parts. Store the tool and accessories in a dark, dry, frost-free place at 5–30 °C.
Noise and vibration
Measured to EN 62841, the sound pressure level LpA is 79.4 dB(A) (K = 3 dB), the sound power level LWA 90.4 dB(A) (K = 3 dB) and the vibration total value ah 5.54 m/s² (K = 1.5 m/s²).
In the box
- Motor unit Einhell GP-EA 18/150 Li BL-Solo
- Earth auger, 150 mm
- Original operating instructions
- Safety instructions









Reviews
There are no reviews yet.