Description
ARGB computer case with four pre-installed fans for a showcase system
be quiet! Light Base 900 FX Black is a Full Tower computer case that supports E-ATX, XL-ATX, ATX, micro ATX and Mini-ITX motherboards and includes four pre-installed 140 mm Light Wings PWM fans. The two-chamber design places the power supply, drives and cables in the rear chamber. Room for a graphics card up to 495 mm long and two radiators up to 420 mm allows you to build a water-cooled system.
Main features
- Four Light Wings PWM fans: three 140 mm fans with reversed blades on the side draw air into the case and one 140 mm fan at the rear expels it, so basic cooling is ready from the start.
- Up to ten fan positions: the top, side and bottom each have room for three fans and the rear for one, so beyond the four installed fans there is room for six more.
- Removable radiator frames: the top and bottom frames accept radiators up to 420 mm, and a radiator up to 360 mm can be mounted on the side, so two large water-cooling radiators fit in the case at the same time.
- Spacious component area: the case accommodates a graphics card up to 495 mm long, a CPU cooler up to 190 mm high and a PS2 ATX power supply up to 225 mm long.
- Support for back-connect motherboards: connections for Asus BTF, MSI Project Zero and Gigabyte Project Stealth motherboards sit behind the motherboard tray, so cables do not run across the viewing window.
- ARGB strip and control button: the 3 m ARGB strip with 172 LEDs is operated from a button on the I/O panel and can be synchronised with the motherboard’s ARGB connector.
- Two ARGB and PWM hubs: the hubs in the upper and lower chambers have 12 sockets in total for connecting fan and lighting cables.
- Adjustable VGA holder: the holder supports a heavy graphics card in both the standard and the rotated orientation, so the card does not sag in the PCIe slot.
Why choose a case with an adjustable orientation?
Repositioning the feet lets you use the case in the standard, rotated or horizontal orientation. This helps you place the glass panel facing the viewer even when the computer stands under a desk, on a shelf or on the other side of a table. The case suits builds that use two water-cooling radiators up to 420 mm.
Component layout and connections
Drive bays take up to six 2.5-inch SSDs or up to two 3.5-inch hard drives. The case includes four 2.5-inch drive mounting points and one 3.5-inch drive mounting point. The I/O panel has two USB 3.2 Type-A ports, one USB 3.2 Gen. 2 Type-C port and an HD Audio connection for headphones and a microphone. Removable dust filters are located at the top, side and bottom.
Installation and dimensions
Choose the case orientation before installing components and fit the feet into the corresponding mounting points. The case measures 32.7 × 53.2 × 48.4 cm, so check the depth of 53.2 cm above all if you are placing it on a shelf or under a desk. A water-cooling radiator can be mounted on the removable top or bottom frame before the frame is returned to the case.
Included in the box
The box includes the computer case with four pre-installed Light Wings PWM fans, a screw set, one additional support post, 12 cable ties and VGA holders for the standard and rotated orientations.
Important before you buy
The power supply is not included. The case uses a PS2 ATX form factor power supply. To mount a vertical graphics card, a PCIe riser cable must be purchased separately. The front panel is glass, and the case has no sound-dampening mats.










Reviews
There are no reviews yet.