Description
Computer case with tempered glass and A-RGB fans
Chieftec APEX GA-01B-TG-OP is a computer case that supports Mini-ITX, Micro-ATX, ATX and E-ATX motherboards. Four pre-installed 120 mm A-RGB fans, three at the front and one at the back, provide airflow in the case straight away. There is room for a graphics card up to 400 mm long.
Main features
- Four pre-installed A-RGB fans: three 120 mm fans are at the front and one at the back, so ventilation from front to back is already in place when the computer is assembled.
- DF-200 control unit: the control unit included connects to the motherboard’s 3-pin +5 V A-RGB header and takes power from a SATA connector. It has six PWM fan connections and six A-RGB device connections.
- Room for large components: the case fits a graphics card up to 400 mm long and a CPU cooler up to 175 mm high.
- Water cooling radiators: a 240, 280, 360 or 420 mm radiator can be fitted to the front, and a 240, 280 or 360 mm radiator to the top.
- Additional fan positions: three 120 mm positions remain free on the top, two 120 mm positions at the side panel and two 120 mm positions above the power supply cover.
- Drive bay options: according to the manufacturer, you can use either three 2.5-inch SSDs and one 3.5-inch hard drive, or two 2.5-inch SSDs and two 3.5-inch hard drives.
- Front panel connections: two USB 3.0 ports, a USB-C port, and microphone and headphone jacks.
- Seven expansion slots: there is room for expansion cards.
Lighting control from the case button
A short press of the front panel LED button switches between 32 lighting modes. Pressing and holding it for three seconds switches control to motherboard sync mode, from which the lighting can be turned off. This also suits a builder whose motherboard has no A-RGB header, because lighting modes can be selected directly from the case.
Installation and component choice
Before installing, check the length of the graphics card, the height of the CPU cooler and the size of the power supply. Connect the DF-200 control unit’s SATA power to the power supply, and for motherboard sync connect its A-RGB cable to the 3-pin +5 V header. Fit the water cooling radiator to the chosen front or top position before the cable routing between components fills up.
Included in the box
The box contains the computer case, four 120 mm A-RGB fans, the DF-200 control unit, a screw kit, hand screws, ten cable ties, a motherboard standoff tool and a user manual.
Important before buying
The power supply is not included. The case uses an ATX power supply, and the manufacturer’s recommended length is up to 220 mm. Water cooling and the radiator must be chosen separately, and the case has no external drive bays, so an optical drive or a front panel card reader cannot be installed.










Reviews
There are no reviews yet.