Description
PC case with a graphics card support arm
The Corsair 3200D RS PC case takes a graphics card up to 400 mm long, or up to 375 mm with the front fans installed. A built-in adjustable support arm keeps the graphics card from sagging. A CPU cooler can be up to 165 mm tall and an ATX power supply up to 180 mm long. There are seven horizontal expansion slots.
Fans and liquid cooling
The RS120 fans can be daisy-chained and all controlled through a single 4-pin PWM header on the motherboard. The case has nine 120 mm fan mounts in total: three at the front, three at the top, two at the bottom and one at the rear, and the front and top also take two 140 mm fans. The front fan mount on the PSU shroud is angled to direct air straight at the graphics card. A 360 mm liquid-cooling radiator fits at the front or the top, and a 120 mm radiator at the rear.
Reverse-connector motherboards and cables
A reverse-connector motherboard has its connectors on the back of the board, so the cables stay behind the motherboard and out of sight through the glass panel. Behind the motherboard there is 24 mm of cable routing space, a built-in cable cover and several tie-down points.
Top panel ports
The top panel has a USB 3.2 Gen 2×2 Type-C port at 20 Gbit/s, a USB 2.0 Type-A port, a combined 3.5 mm headphone and microphone jack and a power button.
Drives
The case holds one 3.5″ hard drive and two 2.5″ SSDs at the same time.
In the box
- 3 pre-installed RS120 PWM fans in the front panel
- built-in graphics card support arm




Reviews
There are no reviews yet.