Description
Kenwood KFC-S1366 car speaker for upgrading your car audio system
The Kenwood KFC-S1366 is a round 2-way car speaker designed to replace or supplement the speakers in your car audio system. It helps bring the sound back to clarity and balance when the original speakers have worn out, or if you simply want a more even reproduction. The frequency range of 45–22,000 Hz covers both the lower tones and the higher details. The 4 Ω impedance and 89 dB sensitivity make it suitable for many typical car setups.
Main features
- 2-way speaker construction, separating lower and higher frequencies for clearer sound.
- Frequency range 45–22,000 Hz, covering a wide audible range for music and speech.
- Sensitivity 89 dB, so the desired volume is achievable with moderate power.
- Impedance 4 Ω, suitable for use with a car radio or amplifier that supports a 4-ohm load.
- Rated power 30 W, the continuous power level intended for everyday listening.
- Peak power 260 W, handles short louder peaks.
- Mounting cut-out diameter 11.4 cm and mounting depth 4.37 cm, helping you quickly check the fit before installation.
- Cone material: polypropylene, a common material for stable and even reproduction.
Compatibility and key dimensions
The Kenwood KFC-S1366 has a nominal impedance of 4 Ω, so it is intended for use with an audio device that supports a 4-ohm load. The speaker measures 157 mm × 157 mm with a depth of 65.7 mm, which helps you assess whether the speaker fits the existing location. The mounting cut-out diameter is 11.4 cm and the mounting depth is 4.37 cm, which is especially important when checking the free space inside a door or behind the dashboard.
Of the power ratings, the rated power is 30 W and the peak power is 260 W. Rated power describes continuous operation, while peak power refers to short maximum bursts that may occur, for example, during louder passages of music.
Installation and use
Before installing, measure the existing opening and compare it with the mounting cut-out diameter of 11.4 cm. Also check the mounting depth of 4.37 cm and the overall speaker depth of 65.7 mm, so that there is enough room behind the speaker. Connect the speaker to the wiring, observing polarity, and make sure the audio device supports a 4 Ω load. Fix the speaker firmly so that vibration does not cause rattling.
Why choose the Kenwood KFC-S1366?
The Kenwood KFC-S1366 is a 2-way car speaker with clear dimensions and specific ratings, allowing you to replace or supplement the speakers in your car audio system. The wide frequency range, 89 dB sensitivity and 4 Ω impedance help keep the setup compatible with common car radios and amplifiers, and the mounting dimensions make the fit easy to check.


Reviews
There are no reviews yet.