Description
Front-loading washing machine with a 64-litre drum and inverter motor
The drum holds 64 l, and its honeycomb surface reduces friction on clothes. The digital inverter motor controls speed and torque precisely during washing, rinsing and spinning. The machine measures 59.5 × 85 × 61 cm (width × height × depth) and weighs 68 kg.
Water use and spin noise
The Eco 40-60 programme uses 52 l of water per cycle and takes 3:59 h at full load. Spin-drying efficiency class is B, and the noise level during spinning is 76 dB(A), noise class B.
Programmes and steam wash
The programme selector offers Cotton, Mix, Eco 40-60, 20 °C, Wool, Delicates, Shirts, Sports, Bedding and Intensive. The Express 15′ quick programme washes lightly soiled loads of up to 2 kg in 15 minutes. Intensive, Bedding and Allergy Care use steam, and Allergy Care rinses at a high temperature with extra rinses. At the start of a wash the machine estimates the load weight and sets the water quantity accordingly. Temp and Spin change the temperature and spin speed, and Delay End sets the wash to finish in 3 to 24 hours.
Adding laundry and child lock
To add laundry during a programme, hold Start/Pause for 3 seconds until the door lock light goes out. The child lock locks every button except power and is switched on by holding Temp and Speed together for 3 seconds. Button sounds are switched off by pressing Speed and Delay End together. After a power cut the machine resumes the programme where it stopped.
Installation
Before first use, remove the 4 transit bolts from the back with the supplied spanner and close the holes with the plastic caps. Level the machine with the adjustable feet so that all four feet rest firmly on the floor. The drain hose end is fixed 65 to 100 cm above the floor; the machine needs an earthed socket and a water pressure of 0.05 to 0.8 MPa. Run the first cycle on Cotton without laundry, with about 10 g of detergent in the drawer.
Cleaning and care
When the drum cleaning icon lights up, run Drum Clean with an empty drum; it heats the water to 80 to 90 °C. The drain pump filter sits behind the cover at the bottom right of the front panel: unscrew it, remove any foreign objects and screw it back. Rinse the detergent drawer and siphon under the tap or with a brush, and the inlet valve filter with water. Unplug the machine and close the tap before any maintenance.
In the box
- Washing machine TCL FF1024WA2
- Cold water inlet hose
- Transit bolt hole caps, 4 pcs
- Drain hose bracket
- Spanner






Reviews
There are no reviews yet.