Description
Graphics card power adapter for power measurement
Fitted between the power socket and the cable, this graphics card power adapter measures and records the power flowing through the 12VHPWR connector. The screen shows current power in watts, voltage and current, minimum and maximum power, 60-second average power, total energy in watt-hours and the sensor temperatures.
Connector detection and audible warning
Connector detection recognises whether the cable is specified for 150, 300, 450 or 600 W. The buzzer sounds if the cable is wrong or loose, if the temperature exceeds the set limit or if the current exceeds the set limit.
Four temperature sensors
Two sensors on the board next to the power connectors monitor the connector temperature. Two external 10K NTC sensors connect by cable, with cable lengths of 5 cm and 20 cm.
Reversed connector version
The Reversed version is for graphics cards whose power socket has the 12 power pins between the PCB and the four sense pins. The maker has approved the 16-pin 12VHPWR version for up to 600 W.
Operation
A short press of the side button changes the screen view and a long press opens the menu. In the menu you set the temperature limit (TWARN), the current limit (CWARN) and the power class of the cable in use (HWARN). ROT rotates the screen by 180°, and STATS and ENERG reset the statistics and the energy reading.
In the box
- WireView Pro GPU 12VHPWR Reversed
- 2 external 10K NTC temperature sensors, cable lengths 5 cm and 20 cm








Reviews
There are no reviews yet.