Description
Console table with a granite top
The Larvik console table with a granite top stands on a single wide central leg, whose cross-section has rounded ends, like the tabletop. The central leg widens towards the bottom and its base is shorter than the tabletop, so the ends of the top extend far beyond the leg. Between the leg and the tabletop there is an oval spacer plate, which sits set in from the edge of the top. The edge of the off-white granite top is rounded.
Material and dimensions
The central leg and the spacer plate are covered with ash veneer in a natural tone. The table is 130 cm long, 40 cm wide and 78 cm high. The maximum permitted load on the tabletop is 20 kg and the table weighs 45.35 kg.
Assembly and wall fixing
The table is delivered disassembled in two packages and two people are needed to assemble it. The spacer plate is fixed on top of the central leg with four bolts, and the tabletop is fixed to the spacer plate from below with four more bolts. The bolts, washers and hex key are included. Assemble the table on a soft surface, for example a rug, so that the surface does not get scratched. Fix the table permanently to the wall with the included wall fixing, because if it falls over it may cause a life-threatening injury. Included are two fixing plates, two screws and a fixing strap. The screws and wall plugs for the wall are not included. Make sure that the chosen fixing method is suitable and safe in your home.
Care
Tighten the bolts again two weeks after assembly and then every three months. Do not place heavy objects on the table and do not sit or stand on it. Clean the table with a damp cloth, using only water or a mild cleaning agent, and wipe it dry with a clean cloth.












Reviews
There are no reviews yet.