Description
Mirrorless camera body with a full-frame sensor and in-body stabilisation
The full-frame mirrorless camera body Sony Alpha 7 III shoots with a 35.6 × 23.8 mm CMOS sensor and steadies the picture with SteadyShot sensor-shift stabilisation built into the body. Autofocus combines phase and contrast detection and works from −3 to +20 EV.
Viewfinder and screen
The 1.3 cm (0.5-inch) electronic viewfinder has 2,359,296 dots, shows 100% of the frame and magnifies about 0.78×. The rear 3.0-inch (7.5 cm) touchscreen has 921,600 dots.
Exposure and 4K video
ISO runs from 100 to 51,200 and expands to 50–204,800; shutter speeds range from 1/8000 to 30 seconds. Video is recorded in XAVC S 4K at 30p, 25p or 24p and in XAVC S HD at up to 120p. A stereo microphone records the sound, and 3.5 mm sockets take an external microphone and headphones.
Memory cards and connections
The first of the two memory card slots takes UHS-I and UHS-II SD cards, the second UHS-I SD cards and Memory Stick PRO Duo, and recording continues automatically on the second card when the first is full. Wi-Fi (IEEE 802.11b/g/n), Bluetooth 4.1 and NFC connect the camera to a smartphone, which can also add location data to the pictures. The camera has a USB-C port (USB 3.1 Gen 1), a Micro USB port and an HDMI micro (type D) output.
Using the camera
Open the battery cover, insert the NP-FZ100 battery while pressing the lock lever with the end of the battery until it locks, and close the cover. Attach both ends of the shoulder strap to the camera’s strap hooks.
Cleaning and care
Blow dust off the lens and out of the mount with an ordinary blower, without touching the contacts inside the mount. Clean the camera surface with a soft cloth slightly moistened with water and then wipe it dry; keep solvents and alcohol away from it.
In the box
- Sony Alpha 7 III camera body with body cap, shoe cap and eyepiece cup
- NP-FZ100 battery
- Micro USB cable
- Shoulder strap




Reviews
There are no reviews yet.