Description
Short of space in the kitchen and strong food smells? The built-in 2in1 ELICA NIKOLATESLA FIT RAW solves both
The induction hob with extractor ELICA NIKOLATESLA FIT RAW BR/A/60 combines a hob with four cooking zones and an extractor integrated into the worktop in one appliance. The 60 cm width suits standard kitchen units well, and the extractor draws steam right next to the cooking pot, reducing the spread of smells in open kitchens. It works with both recirculation and extraction, so you can adapt the solution to your existing ventilation.
Key features
- 2in1 solution combines an induction hob and an extractor, freeing up space on the wall or ceiling that a separate hood would take, and suiting open or smaller kitchens well.
- 60 cm built-in hob fits a standard kitchen cabinet and can be installed either on top of the worktop or flush with the worktop for a uniform look.
- Four cooking zones and a Bridge zone offer flexibility, allowing two adjacent areas to be joined into one larger zone, for example for a grill pan or a larger pot.
- Touch slider control makes power adjustment smooth, and the timer, pause function and automatic heating-up make everyday cooking easier.
- Powerful air extraction with a minimum airflow of 220 m³/h and up to 620 m³/h in boost mode ensures effective removal of steam and smells, with energy efficiency class A.
- A reasonable noise level of about 43–66 dB depending on the mode, which is suitable for use in kitchens open to living areas too.
- Safety in everyday use is ensured by a child lock, a residual heat indicator and power management, which help reduce the risk of injury and overload.
- Glass-ceramic and a black matt finish give the hob a modern look, and the smooth glass surface is easy to keep clean with proper care.
Uses, compatibility and maintenance
ELICA NIKOLATESLA FIT RAW BR/A/60 is a 60 cm wide built-in hob with extractor that suits most kitchen units of standard width. The extractor can be connected to an extraction ventilation duct or used in recirculation mode if the building has no suitable duct. The exact cut-out dimensions, duct diameter and other installation requirements must be checked in the manufacturer’s installation manual or agreed with a professional installer.
The hob offers four cooking zones, a Bridge zone, a Power Booster function, a timer, a pause mode and automatic heating-up. All zones are controlled via a touch slider panel, which allows cooking to be adjusted precisely. It is recommended to clean the glass-ceramic surface only with products intended for glass ceramics and to avoid abrasive sponges, so that the surface stays scratch-free.
When using the extractor, attention must also be paid to filter maintenance. The grease filters and the odour filter must be cleaned or replaced according to the manufacturer’s instructions. For the recirculation solution the manufacturer has a separate HP regenerable ceramic odour filter KIT0167755, with which the appliance works in recirculation mode. The maintenance intervals and the exact regeneration procedure are described in the user manual, which should be followed to keep the appliance reliable and efficient.
Installation and use
The installation of the hob should be entrusted to a competent installer, because the appliance requires a correct electrical connection at 220–240 V and a suitable ventilation solution. The kitchen furniture must have sufficient load-bearing capacity, and the worktop thickness and the construction of the base cabinets must be taken into account. The hob can be chosen either as a surface-mounted solution or one installed flush with the worktop, depending on the kitchen design.
When planning the ventilation system, you should decide whether to use extraction or recirculation. For extraction, the manufacturer’s additional kits are useful, such as the Nikolatesla filtering Back outlet KIT0180522, which allows the air outlet direction to be fine-tuned, and the different plinth solutions KIT0167756 and KIT0167757, which help to bring the air flow in line with the furniture structure. For a visual finish, the Kit Frame 60 cm KIT0196809 with a stainless steel frame is available, which is suitable if you prefer a look with a frame.
In everyday use, select the desired cooking zone, set the power level with the slider and use the timer or pause function as needed. The residual heat indicator shows when the surface is still hot, and the child lock helps prevent accidental switching on. The extractor power can be chosen according to the intensity of cooking, boost mode can be used if necessary, and after cooking the appliance can be left running for a short time to remove moisture and smells better.
When to choose ELICA NIKOLATESLA FIT RAW BR/A/60?
This built-in induction hob with extractor suits you well if you want to save space in the kitchen, do without a separate wall or island hood and achieve a uniform modern worktop. The 60 cm width, four cooking zones with a Bridge zone, a powerful extractor with A-class energy efficiency and safety-enhancing functions create a balance between performance and convenience. If you value a clean line and good reliability and need both a hob and an extractor in one appliance, ELICA NIKOLATESLA FIT RAW BR/A/60 is a practical choice.




Reviews
There are no reviews yet.