Description
A space-saving solution for the kitchen: an induction hob and cooker hood in one appliance
An induction hob with a built-in cooker hood helps keep the kitchen worktop as spacious as possible and removes steam right at the cooking pot. The Elica NikolaTesla Fit 3Z model is intended primarily for smaller and open kitchens where a separate hood fixed to a wall or ceiling is not wanted or cannot be installed. A recirculation solution, powerful extraction and well-controlled induction make everyday cooking comfortable and controllable.
Main features
- 2-in-1 solution: the hob and cooker hood are in one appliance, which saves space and leaves the wall and ceiling visually cleaner.
- Induction technology: 3 heating zones warm cookware quickly and precisely, the surface itself heats up less and is easy to clean.
- Built-in recirculation cooker hood: the air is cleaned and directed back into the room, so no exhaust duct through the wall is needed.
- Ceramic odour filter: a durable filter helps reduce smells and its service life is longer than that of ordinary carbon filters.
- Powerful airflow: the maximum airflow of the cooker hood is up to 480 m3/h and in Boost mode up to 595 m3/h, which helps quickly remove steam and smoke.
- Quiet operation: the noise level starts from about 42 dB and stays within comfortable limits in normal use.
- A energy class: an energy-efficient appliance that helps reduce electricity consumption compared with older solutions.
- Touch slider control: the Slider control panel lets you change the power smoothly and the functions are quickly accessible.
Compatibility with the kitchen and furniture
This model suits standard-width kitchen furniture, as the width of the hob is 60 cm and the depth 50 cm. Note that the height of the appliance is about 26 cm, which means planning enough space under the worktop in the cabinet. In particular, the placement of the lower drawers and the location of the water trap must be thought through so that the cooker hood part and the air return channels fit properly.
The cooker hood works on the recirculation principle, so there is no need to build a ventilation duct through the wall. The air is usually directed back into the kitchen through the plinth or separate openings. The exact layout depends on the kitchen furniture solution, so before installation it makes sense to look over the manufacturer’s drawings and make sure there is enough room for airflow in the cabinet and the plinth.
The appliance supports wireless integration with a cooker hood, which makes it possible, if needed, to pair the hob with a suitable separate hood so that they are controlled together. Compatibility details and uses depend on the specific Elica models and are specified in the manufacturer’s documentation.
Use and care
The glass-ceramic top surface is smooth and easy to clean. For everyday care a soft cloth and a suitable glass-ceramic cleaning agent are enough, and it is recommended to remove stronger dirt with a special scraper so as not to damage the surface.
The cooker hood has a metal grease filter and a ceramic odour filter. The grease filter needs regular cleaning to maintain effective airflow. The ceramic filter has a long life and, according to the manufacturer’s instructions, it can be regenerated from time to time, which significantly extends its service life. More detailed cleaning and maintenance recommendations are given in the user manual supplied with the appliance.
The hob is controlled by means of a touch Slider panel. You can choose a specific heat level, use the Booster function for fast boiling, automatic heat increase and decrease, a timer for each zone and a pause function for short interruptions. The child lock and residual heat indication help increase safety in use.
Installation and usage recommendations
The appliance is intended for surface-mounted or flush installation, which lets you choose the solution that best matches the kitchen furniture. During installation the dimensions and drawings given by the manufacturer must be followed to ensure sufficient ventilation and a safe distance from the furniture.
In summary, the hob requires an electrical connection of sufficient power, the type and fuse size of which are given in the technical data. The electrical connection and final installation should be carried out by a qualified electrician and installer. With a recirculation system, the air outlet openings in the cabinet and the plinth must be planned according to the manufacturer’s instructions, so that the air can move without obstruction.
Included in the set
The set includes the Elica NikolaTesla Fit 3Z 60 cm induction hob with a built-in cooker hood, a metal grease filter and a ceramic odour filter, as well as the basic connection parts needed for recirculation to direct the air back into the kitchen. Installation and use are supported by the technical documentation and user manual.
When to choose the Elica NikolaTesla Fit 3Z?
This model suits you if you want a space-saving and modern kitchen solution in which the hob and cooker hood are in one appliance. 3 induction zones, a ceramic odour filter, the A energy class and a powerful yet relatively quiet cooker hood make it a practical choice for both smaller kitchens and kitchens with an open plan. If you value a clean worktop and want to avoid a separate hood on the wall or ceiling, the Elica NikolaTesla Fit 3Z is one of the solutions that is definitely worth considering.



Reviews
There are no reviews yet.