Description
Cat water fountain with three flow modes
The water fountain has three flow modes: spray, waterfall and pool. The larger water surface of the elongated drinking bowl reduces competition between cats at the drinking spot, which makes the fountain suitable for homes with several cats.
Wireless pump and filtration
There is no physical contact between the pump and the power base, because the circuit board is sealed inside the housing. The control unit of the power base has IPX4 protection, meaning it is protected against water splashes from any direction. The filter system catches particles, debris, cat hair, odours and chlorine residues. The pump has a cotton pre-filter for additional protection.
Installation
Install the pump, the pump cover and the drinking bowl so that the water level sensor faces the inside of the tank. Place the main body on the power base so that the base does not lift the tank. Put the power cable into the groove of the tank, connect it to the adapter and plug the adapter into a mains socket.
Cleaning and maintenance
No tools are needed for disassembly. Lift the main body off the power base with both hands, raise the top of the fountain and remove the drinking bowl. Unscrew the spout anticlockwise from the drinking bowl and rinse the parts with clean water. Remove the filter cartridge cover and clean or replace the filter. Take out the pump and the pre-filter, then remove the pump filter cartridge, impeller cover and impeller in turn and rinse them with clean water. Wipe the power base dry with a dry cloth. Finally, fill the tank with water up to the water level line, refit the drinking bowl and place the tank on the power base. The manufacturer recommends cleaning the filter of floating hair every 3 days and the pre-filter every 10 days, and replacing both every 30 days. If the fountain has not been used for a long time, dry the filter.
Included in the box
- Main body
- Filter
- Pre-filter
- Water pump
- Power base
- Adapter





Reviews
There are no reviews yet.