Description
Drive caddy for a second 2.5-inch drive in a laptop
This drive caddy holds a 2.5-inch drive 7 mm or 9.5 mm high and connects to the laptop over SATA III at up to 6 Gb/s. The operating system and BIOS (UEFI) see the drive in the caddy as a standard hard drive, the laptop can boot from it and it works without drivers.
Key features
- Supports TRIM for SSDs.
- Connects to the laptop with a 13-pin (7 + 6) Slim SATA connector; the drive plugs into a 22-pin (7 + 15) SATA socket.
- Two switches set the caddy for most laptops, including Lenovo, HP, Dell, ASUS, Acer, Sony and Toshiba.
- The drive is held without screws; rubber plugs reduce drive vibration.
- A built-in capacitor stabilises the drive’s power supply and an LED shows drive presence and data transfer.
- Weight without faceplate is 66 g.
In the box
- drive caddy
- 4 rubber plugs
- plastic pry tool
- screwdriver
- faceplate
- printed installation guide




Reviews
There are no reviews yet.