Description
Tempered-glass PC case with a raised cooling chamber
The PC case with a separate radiator chamber keeps the liquid-cooling radiator in a raised top chamber, so the radiator and the other components have separate airflow paths. In the maker’s test with the same hardware, the CPU ran at 85.91 °C at 320 W, against 90.07 °C in a conventional single-chamber layout. Vertical grille bars at the front let air in and the front carries a real wood finish whose grain differs slightly from case to case.
Pre-installed liquid cooler and fans
The pump speed is adjustable from 2500 to 3400 rpm and the radiator carries three fluid-dynamic-bearing fans running at 500–2500 rpm. The short 250 mm tubes keep the main chamber open to view. Two reverse-blade FL12R SE ARGB fans at the bottom draw in fresh air. Three 120 mm or two 140 mm fans can be added above the radiator for a fan-radiator-fan push-pull layout.
Component sizes and power supply
The graphics card can be up to 413 mm long, or up to 388 mm with front fans fitted. A CPU air cooler up to 175 mm tall fits, and the case takes an ATX power supply up to 160 mm long or an SFX or SFX-L unit. The power supply sits horizontally at the front, with its cable connections behind the motherboard. With support for rear-connector ATX and micro ATX motherboards, the motherboard cables also go behind the board.
Assembly and care
All panels come off without tools. There is 35 mm of cable routing space with Velcro straps and covers. A pop-out hook is hidden in the bridge that joins the panels. A long graphics card rests on the bracket supplied.
In the box
- PC case DeepCool CL6600
- Pre-installed 360 mm ARGB liquid cooler with three fans
- 2 pre-installed FL12R SE ARGB fans at the bottom
- Graphics card bracket









Reviews
There are no reviews yet.