Description
Tempered-glass PC case for back-connector motherboards
In the white (White TG Clear Tint) tempered-glass PC case Fractal Design Epoch XL the left side panel is tempered glass and the right one steel. The motherboard tray also takes reverse-connector ATX and micro ATX motherboards, whose connectors sit on the rear of the board. The front and top panels are mesh for air intake, and behind the front panel sit three Momentum 14 fans with fluid dynamic bearings (FDB).
Graphics card, CPU cooler and liquid cooling
With a front radiator the case takes a graphics card up to 395 mm long. A CPU air cooler can be up to 176 mm tall. The front and top each take up to a 360 mm radiator, and the rear a 120 mm radiator. The top takes three 120 mm, two 140 mm or two 180 mm fans, the front three 120 or 140 mm and the rear one 120 mm fan.
Power supply, drives and cables
The case takes an ATX power supply up to 290 mm long, with a dust filter. Four drives can be fitted: two 3.5″ or 2.5″ drives and two 2.5″ drives. There is 37 mm of cable space behind the motherboard, with grommeted cable holes and movable hook-and-loop straps. The rear has seven expansion slots.
I/O panel and tool-free access
The top I/O panel has a 20 Gbit/s USB-C port, two 5 Gbit/s USB-A ports, a combined headphone and microphone jack and the power button. The front and top panels and the PSU filter come off without tools: the front panel pulls off and the top panel slides out by its fabric tab. The side panels, PSU bracket and drive brackets use captive thumbscrews.
In the box
- Fractal Design Epoch XL PC case with three fitted Momentum 14 fans
- 8 motherboard screws and 1 standoff
- 4 PSU screws
- 16 SSD screws
- 8 HDD screws and 8 rubber grommets
- 4 cable ties
- User manual






Reviews
There are no reviews yet.