Description
Dash cam recording ahead, behind and inside the cabin
The DDPAI Z60 Pro 2026 3-CH three-camera dash cam records the road ahead in 4K (3840 × 2160 pixels, 30 fps), behind the vehicle in Full HD (1920 × 1080 pixels, 30 fps) and the cabin in 2K (2560 × 1440 pixels, 25 fps) at the same time. The front camera also records 2880 × 1620 pixels at 60 fps, and the front and rear cameras have HDR. πLink technology synchronises the cameras, so you manage and view the picture from all three cameras in the DDPAI app.

Sony STARVIS 2 sensors and night image
The front camera has an 8.3 MP Sony STARVIS 2 IMX678 CMOS sensor and the rear camera a 2.4 MP Sony STARVIS 2 IMX662 CMOS sensor. Realcube 2.0 image processing keeps detail in bright and dark parts of the frame. The front lens has an f/1.75 aperture and the rear lens f/1.55, both with a 138° field of view; the cabin camera with its MINI2X sensor and f/1.5 lens covers 123°. NightVIS 2.0 improves night visibility with AI ISP image processing.

Parking monitoring and collision detection
While parked, the camera records in time-lapse mode at 5 fps, which uses less storage space. When an impact is detected, collision mode automatically starts high-resolution recording. IPS power management monitors the car’s voltage and protects the battery from deep discharge. Parking monitoring works with the separately sold smart wiring kit.

4G module, geofence and cloud album
With the separately sold 4G module and smart wiring kit you reach the camera remotely through the DDPAI app: view recordings, wake the device, take photos and see the car’s location in real time. In a collision the system sends a notification with location, time and recording. With a geofence you set a virtual area and get a message when the car enters or leaves it. The cloud album uploads emergency recordings and photos automatically.
Driver assistance, GPS and voice command
The ADAS 2.0 driver assistance system warns when the vehicle ahead starts moving and when the driver shows signs of fatigue. The voice command “Take a photo” takes a photo and records a 10-second clip covering 5 seconds before and 5 seconds after it. The built-in GPS module uses the GPS, BDS, GLONASS, GALILEO and QZSS satellite systems and records route, time, speed and location.
Wi-Fi, Bluetooth and screen
5 GHz Wi-Fi Turbo speeds up uploading and downloading recordings to your smartphone. After first pairing, Bluetooth BLE 5.1 sets up a quick connection to the camera’s Wi-Fi. Recordings are saved as MP4 with AI.265 or H.264 encoding, and on the 3-inch screen the SR 2.0 driving effect shows trip data.

Dual recording memory
D²save 2.0 provides 32 GB of internal eMMC memory, and a microSD card of up to 512 GB can be added. If the memory card fails, recording continues to internal memory automatically. The device has a three-axis G-sensor and a supercapacitor and operates at –20 to 70 °C.
Installation and power
Power comes through a USB-C port and the rear camera connects to a separate port. The box includes a 3.5 m front camera power cable, a 5.5 m rear camera extension cable, and a πLink cable and splitter cable for installing all three cameras.
In the box
- Dash cam DDPAI Z60 Pro 2026 3-CH, 1 pc
- Rear camera
- Cabin camera
- Cable concealer
- Front camera power cable, 3.5 m
- Rear camera extension cable, 5.5 m
- Car charger
- 3M adhesive tape
- Electrostatic sticker
- Warning sticker
- πLink cable
- Splitter cable 1 → 2
- Power cable, 0.3 m
- Power cable, 6 m
- User manual
- Installation guide

Reviews
There are no reviews yet.