Description
Convector heater with 24-hour timer and turbo fan
The floor-standing convector heater with a 24-hour timer has two heating switches on its side to choose 750 W, 1250 W or 2000 W; switch on both for full power. The turbo fan spreads warm air through the room faster and also runs without heating when you only want air circulation. The maker gives the fan noise level as below 45 dB. If the heater overheats, the protection cuts the power automatically.
Setting the thermostat and timer
Turn the thermostat knob to MAX and switch on the heating switches; when the room reaches the temperature you want, turn the knob back slowly until the thermostat clicks and the switch lights go out. The heater then keeps that temperature by switching itself on and off. The timer ring has 96 segments of 15 minutes each: the segments pushed to the outer edge set when the heater runs every day. With the slide switch at I the heater runs continuously, and at 0 the heating element gets no power.
Assembly
Before first use, fit the two feet to the base with the four self-tapping screws supplied. There is a carry handle at each end of the housing.
Cleaning and care
Let the heater cool down and unplug it before cleaning. Keep the air inlet and outlet clean and wipe the housing with a damp cloth, then a dry one, without detergents or abrasives. Out of season, store the heater in a bag against dust in a cool, dry place.
In the box
- Convector heater Mesko MS 7741
- 2 plastic feet
- 4 screws
- User manual











Reviews
There are no reviews yet.