Description
Metal detector for searching on land and in fresh water down to 3 metres
The Garrett AT Gold metal detector works with a 5 × 8 inch (13 × 20 cm) PROformance DD search coil. Its dust-, dirt- and waterproof build is usable underwater down to 3 m in fresh water, so you can also search a riverbed.


Ground balance, fast or manual
On mineralised ground Fast Track balances automatically while you hold the GND BAL button, and you can balance manually with the THRESHOLD (+) or (−) button. The Ground Balance Window function widens the balance range so that small changes in the ground do not disturb the signal.

Iron audio and 44-level iron discrimination
The IRON AUDIO button switches on iron audio, which signals even filtered iron, so you can leave bottle caps and washers in the ground. The IRON DISC button sets iron discrimination in 44 levels, and the proportional Pro Audio modes signal the size, shape and depth of a target.

Target identification and pinpointing
Digital target ID shows the conductivity of a target on a 0–99 scale, and Graphic Target Analyzing shows the target’s characteristics together with the discrimination pattern on the same screen. The depth indicator shows the depth of a coin-sized target, and while you hold the PINPOINT button, electronic pinpointing locates the target.

Search modes and four operating frequencies
You can choose the True All-Metal mode, which detects every metal, or three discrimination modes, switching between them with the MODE button. The SENSITIVITY button changes sensitivity, the THRESHOLD button the background sound level, and the FREQ button switches between four operating frequencies.

Assembly
Loosen the lower camlock, extend the lower stem, insert the mounting washers, connect the search coil and hand-tighten the wing nut. Then loosen the upper camlock, insert the S-stem with the control housing, set the stem to a length that suits you and hand-tighten the camlocks. Wrap the cable snugly around the stem with the first turn over the stem. The arm cuff can be moved by fitting the screw underneath into the other hole.
Use
Four AA batteries come already installed in the detector, and it powers on in the last mode used. When searching, hold the coil 2–3 cm above the ground and sweep it left and right at about 1 m/s.

In the box
- Metal detector Garrett AT Gold, 1 pc
- adjustable control housing with S-shaped stem
- upper and lower stem (connected)
- 5 × 8 inch DD search coil
- wing nut, threaded screw and 2 mounting washers
- Garrett MS-2 headphones
- 4 AA batteries (installed in the detector)
- user manual


Reviews
There are no reviews yet.