Description
Hard drive for NAS, built for 24/7 operation in a RAID array
The Seagate IronWolf ST8000VN002 is an 8 TB 3.5-inch hard drive for NAS devices that spins at 5400 rpm and connects over SATA III (6 Gbit/s). Its sustained data rate reaches 202 MB/s. Its performance is tuned for RAID arrays.
Workload and reliability in multi-drive systems
The maker states a mean time between failures (MTBF) of 1,000,000 hours. Balance technology supports several drives working together in one system. For video stream recording the drive completes commands in consistent times and supports ERC, which limits error-recovery time so that the RAID controller keeps the drive in the array.
Installation
The drive can be mounted in any orientation with four screws in the side or bottom mounting holes. Use 6-32 UNC screws that reach no more than 3.56 mm into the hole. Leave at least 0.76 mm of free space around the drive for cooling. The drive supports latching SATA cables and hot-plugging, so it can be connected to a running system.
Health monitoring
Drive health can be monitored through S.M.A.R.T. data, and S.M.A.R.T. attribute 194 shows the temperature. Seagate SeaTools software runs a drive self-test. The maker recommends keeping the drive temperature below 60 °C in sustained use.



Reviews
There are no reviews yet.