Description
KRUX Exo PC case with four ARGB fans
KRUX Exo is a PC case that supports ATX, micro ATX and Mini-ITX motherboards and comes with four pre-installed 120 mm ARGB fans. Three fans are located on the side mesh panel and one at the back, so you can start building the computer with working cooling and lighting. The case suits builds that need room for a full-length graphics card, a tall air cooler or water cooling to be added later.
Main features
- Four pre-installed 120 mm ARGB fans: three fans draw air in through the side mesh panel and the rear fan pushes it out of the case, so you do not need to buy separate fans for basic cooling.
- ARGB hub and separate LED button: the hub connects all lighting modules to a single header behind the board, and the button on the case lets you change the lighting mode without an app.
- Two tempered glass panels: the front and side panels keep the components visible, while air intake takes place through the mesh panel on the opposite side.
- Room for larger components: a graphics card up to 405 mm long and a processor cooler up to 181 mm tall fit in the case, even with the fans installed.
- Hidden-connector motherboard support: the power and fan connections on the back of the motherboard tray leave the area behind the glass clearer, and cable routing is less visible.
- Up to ten 120 mm fan positions: in addition to the four existing fans, you can add cooling on the top, sides and bottom depending on the components you choose.
- Water cooling radiator support: a 240 or 360 mm radiator fits on the top, a 240 mm radiator on the side and a 120 mm radiator at the back, so you can change your cooling later without replacing the case.
- Four drive bays: two 3.5-inch hard drives and two 2.5-inch SSDs fit in the case at the same time, so adding SSDs does not reduce the number of hard drive bays.
Component layout and maintenance
The power supply is installed at the bottom of the case and its maximum length is 205 mm. The front panel has two USB-A ports, one USB-C port and an audio jack. On a desk or shelf, allow for the case dimensions of 23.5 × 45 × 45.3 cm. Clean the dust filters on the top of the case and under the power supply regularly so that accumulated dust does not block airflow.
What to choose before building?
The power supply is not included. Choose it separately and check the graphics card and processor cooler dimensions before installing.
What’s in the box
The box contains the KRUX Exo PC case, four KRUX 120 mm ARGB fans, a lighting hub, a mounting kit and the user and safety manual.
































Reviews
There are no reviews yet.