Description
EV charger for charging at home and on the road
The portable EV charger dé 3kW V2 is a single-phase charger with a Type 2 connector and a 6 m cable that charges the car from a Schuko socket. It runs on 230 V AC and the charging current can be set between 6 and 16 A.

Charging current and delayed start set with a button
With the button on the control box you can change the charging current, set a delay before charging starts, set up the Wi-Fi connection and pause and resume charging. After 5 minutes on standby the charger goes to sleep; a button press or plugging in the Type 2 connector wakes it.
LED screen and status light show the charging progress
The screen shows real-time current, voltage and power, the energy charged in kilowatt-hours, the charging time and the status of the car, earth and Wi-Fi connections. The status light distinguishes standby, car connected, charging and error.

Protection and outdoor use
The charger has residual current protection of 30 mA AC + 6 mA DC and protection against leakage current, overcurrent, over- and undervoltage, overheating and earth faults. It also detects relay welding and CP signal errors and lowers the charging current automatically when it overheats. The control box is rated IP66, the Type 2 connector IP55, and the operating temperature is −25 to +50 °C.

Use
- Plug the Schuko plug into an earthed socket.
- Set the charging current and, if needed, a delayed start with the button.
- Plug the Type 2 connector into the car’s charging inlet.
Choose the settings before plugging the Type 2 connector into the car.
In the box
- Portable EV charger dé 3kW V2, 1 pc

Reviews
There are no reviews yet.