Description
Black PC case with four ARGB fans
KRUX Atron is a black Midi Tower PC case that supports ATX, micro ATX and Mini-ITX motherboards, and comes with four 120 mm PWM ARGB fans pre-installed. It suits a gaming PC builder who wants to combine a large graphics card, a tower cooler and components with lighting visible behind the panoramic glass.
Main features
- Four pre-installed ARGB fans: three KRUX Reverse 120 mm PWM ARGB fans with reversed blades and one rear 120 mm PWM ARGB fan provide illuminated cooling as soon as the case is assembled. The reversed blades leave the front side of the blades visible through the glass.
- ARGB and PWM splitter: the included splitter connects up to eight devices to one PWM socket and one 5 V three-pin ARGB socket, so you do not need a separate motherboard socket for each additional fan to control it.
- Panoramic glass: tempered glass covers the front and side panels, so the components and the ARGB LED strip running along the bottom of the case are visible from two directions.
- Up to ten fan positions: six free positions are added to the four pre-installed fans. Up to three 120 mm or two 140 mm fans fit on the top, three on the side and three 120 mm fans at the bottom.
- Water cooling radiator positions: a radiator of up to 360 mm can be installed on the top, up to 360 mm on the side and a 120 mm radiator at the rear. This leaves two mounting positions for a 360 mm AIO.
- Room for graphics card and cooler: the case fits a graphics card up to 429 mm long and a CPU cooler up to 165 mm high, including tower coolers in the Noctua NH-D15 class.
- Separate power supply compartment: the power supply sits in a separate compartment behind the motherboard tray, which keeps the power cables out of sight behind the glass panels.
- Removable dust filters: the top filter and the power supply filter are located on the top of the case and at the bottom.
Installation and connection
Connect the included ARGB and PWM splitter to the 5 V three-pin ARGB header and the PWM header on the motherboard. Do not connect a 5 V ARGB device to a 12 V RGB header, as this may damage the device. The front panel has USB-C, USB-A 3.0, USB-A 2.0 and a 3.5 mm audio jack, as well as power and reset buttons.
What’s in the box
The box contains the KRUX Atron PC case, three 120 mm KRUX Reverse PWM ARGB fans, one rear 120 mm PWM ARGB fan and the ARGB and PWM splitter. The power supply, ARGB controller or standalone controller, water cooler, radiators, drives and extra drive cages are not included.
Drive layout
The case has one 2.5 or 3.5 inch combo drive bay and one 3.5 inch drive bay. You can install up to two 3.5 inch hard drives, or one 2.5 inch SSD and one 3.5 inch hard drive.









Reviews
There are no reviews yet.