Description
Black pine wood wall shelf with two shelf boards
The pine wood wall shelf with two shelf boards Mostar is assembled from crossing boards that hold onto each other through grooves, without screws. The long shelf boards pass through two shorter upright boards, and the boards are positioned offset: the upper shelf board extends further to one side, the lower one to the other, and one upright board is taller than the other. The shelf can be hung on the wall in two positions: with the long shelf boards horizontal or upright. In the upright position, the two short boards serve as the shelf boards. The shelf is made of pine wood with a black finish, and the wood grain is visible through the finish.
Dimensions and load capacity
In the horizontal position the wall shelf is 86 cm wide, 10 cm deep and 38 cm high; when hung upright, the width and height are reversed. The shelf weighs 1.36 kg. The whole shelf holds up to 8 kg. On each shelf board, the part between the upright boards holds up to 2 kg and each end up to 1 kg.
Assembly and wall mounting
The shelf is delivered disassembled and must be assembled: slide each shelf board into the grooves of the upright boards. Assemble the shelf on a soft surface, for example a rug, so that the surface does not get scratched. The shelf hangs on the wall on two screws, and the back of the upright boards has hanging holes for this. Mark the screw positions with a pencil and a spirit level, drill the holes and fasten the screws to the wall. Wall screws and wall plugs are not included, choose them so that the fixing suits your wall and is safe. Clean the shelf with a damp cloth, use only water or a mild cleaning agent, and wipe the surface dry with a clean cloth.







Reviews
There are no reviews yet.