Description
Blackout roller blind for privacy and light control
This beige blackout roller blind helps create a comfortable light and temperature environment in the room while providing privacy. With dimensions of 95 x 210 cm and a fabric width of 90.7 cm, it suits a range of windows at home and in the office.
Main features
- Durable polyester fabric is wear-resistant and needs little maintenance; it is easy to clean by dusting or wiping with a damp cloth.
- Blackout design provides privacy and helps block direct sunlight, keeping the room cooler and reducing heat entering the room.
- Two fitting options let you mount the blind to a wall or window frame either with screws or without drilling, using mounting clamps.
- Drill-free mounting clamps suit window frames 1.6–2.5 cm thick, allowing the blind to be installed without damaging the frame.
- Chain mechanism makes adjusting the height of the blind easy, so you can quickly change the amount of light as needed.
- Child safety clamp keeps the chain and cords close to the wall, reducing the risk of them being within reach of small children.
- Wide range of use suits different rooms, such as living rooms, bedrooms, offices, cafés and office buildings.
- Correct width selection: the blind fabric is slightly narrower than the overall width, leaving a gap of about 4.3 cm in total at the sides.
Installation and use
The blind can be fitted either to a wall or directly to the window frame. If necessary, screws and wall plugs are used; as an alternative, mounting clamps can be fixed to the edge of the window frame that is 1.6–2.5 cm thick. The height is adjusted with the chain, which allows the blind to be lowered or rolled up quickly. For maintenance, regular removal of dust or gentle cleaning of the fabric with a damp cloth is sufficient.
Warnings
- Always keep cords and chain out of reach of young children, as cords and chains can wrap around a child’s neck.
Good to know about measuring the blind
- Measure the window glass first, then allow for the fabric being slightly narrower than the overall width including the clamps.
- To ensure full coverage, add 4.3 cm to the width of the window glass so that the blind extends sufficiently beyond the edges of the glass.













Reviews
There are no reviews yet.