Description
The Mill CBOC20FLOOR is a free-standing infrared patio heater with 2000 W of power in eight levels and an IP45 rating. The heating element is a low-glare golden halogen tube with reduced red light. IP45 means protection against particles larger than 1 mm and against water jets.
Patio heater power levels, timer and oscillation
Power changes in 250 W steps; the lowest level is 250 W. The timer sets the running time up to 8 hours in one-hour steps. The oscillation function turns the heater so that the heat spreads across the patio.
Operation with the knob and the remote
Turning the knob on top clockwise raises the power and anticlockwise lowers it. The light ring around the knob shows the power level in red segments and the timer hours in green segments. A short press opens the timer setting; a long press until the beep switches oscillation on or off. The remote has separate buttons for timer, power and oscillation.
Assembly and connection
Before use, pass the power cord through the base, attach the base to the body and fix the cover plate under the base with four screws. The power cord is 1.8 m long and the heater runs on an ordinary circuit with a type B 10 A fuse. If the heater tips over, the safety switch turns it off. A handle on top of the body makes it easy to move.
Cleaning and maintenance
Check that the reflector and heating tube are clean at least once a month. Before cleaning, unplug the heater and remove the front grille through the slot in the frame with a flat-blade screwdriver. Clean the reflector and tube with a soft cloth, a soft brush or cold dry air; the cloth may be slightly damp but never wet. Use only chemical-free, non-abrasive cleaning agents so the reflector stays free of scratches.
In the box
- Patio heater with power cord
- Base
- Remote control




Reviews
There are no reviews yet.