Leave your address and we write once, when it is back in stock.
We use the address only for this one e-mail. You confirm the request first with the link we send you. An unconfirmed request is deleted after 30 days, a finished one after 90.
The spool holds 1 kg of natural white PVA filament Flashforge 3DP-PVA-01-NAT, 1.75 mm in diameter. The material is a modified thermoplastic polyvinyl alcohol with good dimensional stability. Water-soluble PVA filament is used to print support structures that you remove from the finished part in water. A 40 µm PVA film dissolves in 20 °C water in 97 seconds.
Recommended print settings
Nozzle temperature 210–230 °C
Bed temperature from room temperature up to 60 °C
Build surface: tempered glass, BuildTak or carbon fibre plate
Nozzle diameter 0.4 or 0.6 mm, 0.4 mm recommended
Layer height 0.12–0.3 mm and print speed 60–90 mm/s
Cooling fan 50–100%, retraction 1–2 mm at 30–50 mm/s
Storage
PVA absorbs moisture from the air, 10–15% of its mass in 24 hours, so keep the spool in its closed, undamaged packaging and reseal a partly used spool before storing it. Moisture, oxygen and UV light speed up ageing, so use an opened spool soon.
Additional information
Weight
1,368 kg
Colour
White
Material
PVA
Compatible models
3D printers
Filament diameter
1.75 mm
Net weight
1 kg
Nozzle temperature
210–230 °C
Base temperature
room temperature up to 60 °C
Nozzle diameter
0.4 or 0.6 mm
Density
1.25–1.26 g/cm³
Tensile strength
65–75 MPa
Heat deflection temperature
55 °C
Water absorption
10–15%
Only a customer who bought the product from us can review it: signed in, or through the link in the e-mail we send after the order. We check the purchase against the order.
We read every review before it is published (rules below).
The average rating is the plain average of all published ratings.
The buyer receives loyalty points for an approved review, whatever its rating or content. Text and a photo earn extra points. Reviews that earned points are marked.
Write about the product and your own experience with it.
A review may not contain personal data, links or advertising.
Offensive or unlawful content is not allowed.
Whether a review is published never depends on its rating.
A photo must be taken by you, and the product must be clearly visible on it.
A photo may not show people who can be recognised, or personal data such as documents, addresses or number plates.
If we do not publish a photo, we send the reviewer the reason by e-mail.
Reviews
There are no reviews yet.
Bought this product from us? Sign in, or open the link in the e-mail we send after the order.
Reviews
There are no reviews yet.