Description
Walking pad for walking and light jogging with remote control
The MERACH MR-T26B1 walking pad runs at 1–6 km/h, carries users up to 120 kg and has a 390 × 925 mm running surface. You control the belt with the remote control supplied.

Three modes from walking to jogging
Three operating modes cover slow walking at 1.0–1.5 km/h, brisk walking at 1.5–3.0 km/h and running at 3.0–6.0 km/h. A short press of the remote’s plus or minus button changes the speed by 0.1 km/h, a long press changes the speed continuously.

Motor and noise level
The motor has a maximum output of 2.75 hp and the noise level stays below 45 dB.

Five-layer belt and silicone shock absorbers
The belt is five-layered and non-slip, the deck has a DiamondGrip surface and six silicone shock absorbers dampen impact.

LED display and MERACH app
The LED display alternates every 5 seconds between speed, time up to 99:59, distance up to 99.9 km and energy burned up to 9999 kcal. Via Bluetooth the treadmill connects to the MERACH app on Android and iOS, where you can follow your training progress.

Use
Place the walking pad on a level surface and adjust the four adjustable feet so that all of them rest on the floor. Plug the power cord into the front socket and switch on the power switch at the front; the machine enters standby. The remote’s start button sets the belt moving at 1.0 km/h after a 3-second countdown. The MODE button selects time, distance or calorie countdown alongside manual mode.
In the box
- Walking pad MERACH MR-T26B1, 1 pc
- Remote control, 1 pc
- Hex key, 1 pc
- Power cord, 1 pc
- User manual, 1 pc

Reviews
There are no reviews yet.