Description
22 kW wall charger with Type 2 socket and RFID authentication
Green Cell EV Powerbox 22 kW is a wall-mounted AC charger for electric cars that charges the vehicle through an IEC62196-2 Type 2 socket. It suits situations where you want a charger with a fixed installation location and charging enabled by RFID card. The charger’s maximum power is 22,000 W and its rated current is 32 A at an input voltage of 380 V. The built-in display and indicator lights give a clear overview of the charging status.
Main features
- IEC62196-2 Type 2 socket, suitable for charging electric cars with a Type 2 connector using a suitable cable.
- 22,000 W maximum charging power, enables faster AC charging on a suitable electrical installation.
- RFID authentication: charging can be enabled and restricted by card to control use.
- IP66 protection class, enclosure protected against dust and water ingress according to the IP rating.
- Built-in display for monitoring the charging status directly on the device.
- 30 mA Type A + 6 mA DC residual current protection, an integrated electrical safety function.
- Overvoltage and undervoltage protection helps protect the device and the electrical installation against voltage fluctuations.
- Short-circuit and overheating protection, additional safety during use.
Compatibility and features in one place
The charger uses a Type 2 charging interface compliant with the IEC62196-2 standard and is equipped with a Type 2 socket. For charging, a suitable Type 2 cable is connected between the car and the charger.
The EV Powerbox has an RFID function, and the kit includes 5 RFID cards that allow charging to be started with a card and use to be controlled. The device has a built-in display and warning lights, but it has no connectivity or communication protocol and does not support dynamic load management (DLM) or OTA updates.
The operating temperature range is -40 to 50 °C. The device measures 295 × 195 mm and weighs 5.39 kg.
Installation and use
Mount the charger on a wall and connect it to a 380 V supply in accordance with the installation requirements. Before starting to charge, connect the Type 2 cable to the charger’s socket and to the vehicle. To start charging, use the RFID card and monitor the status on the display and through the indicator lights.
In the kit
- Green Cell EV Powerbox wall charger
- 5 RFID cards
Why choose the Green Cell EV Powerbox 22 kW?
This wall charger combines a Type 2 socket, 22 kW power and RFID usage control in one solution. The integrated display and several protective functions help you monitor charging clearly and use it safely, both for private use and in a shared parking space.






Reviews
There are no reviews yet.