Description
Extending dining table in smoked oak veneer
The oval extending dining table is 200 cm long and 100 cm wide without the extension leaves. The two halves of the top slide apart on metal sliding rails, and one or two extension leaves are placed between them, making the table 250 or 300 cm long. Clamps under the top hold the top halves and the extension leaves together. The four round wooden legs are under the round ends of the top halves, so there are no legs under the extension leaves.
Material and finish
The tabletop is made of MDF and covered with smoked oak veneer, whose dark brown surface shows the oak wood grain. The extension leaves have the same surface as the rest of the top. The legs and the frame under the top are made of wood and in the same shade as the top. The wood of the table is FSC certified (FSC C158023).
Dimensions
The table is 100 cm wide and 75 cm high. The length is 200 cm without extension leaves, 250 cm with one extension leaf and 300 cm with two extension leaves. The maximum permitted load of the middle section extended with the extension leaves is 40 kg. The table weighs 57.4 kg.
Assembly and care
The table is delivered disassembled in one package and must be assembled. Two sliding rails are screwed under the top halves, then the four legs are attached with bolts and foot pads are placed on the ends of the legs. Assemble the table on a soft surface, for example a rug, so that the top does not get scratched. Tighten the screws again two weeks after assembly and then every three months. Wipe the table with a damp cloth, use only water or a mild cleaning agent and dry with a clean cloth.











Reviews
There are no reviews yet.