Description
Carbon fibre tripod with video head for studio and location work
The SmallRig AD-Pro8 4465B carbon fibre tripod holds a camera rig of up to 8 kg at 58–196 cm with its oil-damped PH8 video head. Folded it is 97 cm long and weighs 5.7 kg.

Six-step counterbalance for different rigs
The PH8 head’s six-step counterbalance balances a 1–8 kg rig so the camera stays put when tilted. To set it, lock tilt and pan, set the drag to zero and the counterbalance to the lowest step, mount the camera and find the balance point by sliding the plate. Then raise the counterbalance step until the camera holds at any tilt.

Separate pan and tilt drag
Tilt drag has four steps (0–3) and pan drag four steps (1–4): a lower step gives faster panning, a higher one slower, steadier movement. The head tilts 90° up and 65° down.

Touch-and-Go plate and half-ball mounting
The camera plate mounts with the Touch-and-Go quick release and takes Manfrotto 501PL plates. To fit the head, set the 75 mm half ball in the tripod bowl, level it with the bubble level and lock it from below with the locking handle. The telescopic pan bar is 35–53 cm long and fits on the left or right side.


Legs with two spreaders and spikes
The tripod has a mid-level and a ground spreader to suit the surface and the space. To extend a leg, lift it, open the quick-release lever, set the height and lock the lever. If a leg still slips when locked, tighten the lever screw clockwise with the hex key; half a turn is usually enough. Press the button to remove a rubber foot and use the metal twin spikes.

In the box
- SmallRig AD-Pro8 4465B tripod, 1 pc
- PH8 video head, 1 pc
- Mid-level spreader, 1 pc
- Ground spreader, 1 pc
- Hex key, 1 pc
- Carrying bag, 1 pc
- Smartphone holder, 1 pc
- User manual, 1 pc

Reviews
There are no reviews yet.