Description
Fully modular power supply with flat cables
The fully modular ATX power supply darkFlash PMT750 connects every cable to its panel, so only the cables you need go into the case. It comes with 8 modular cables that are flat and flexible. Flat cables make installation easier and leave more room for air in the case.

Connectors for the graphics card and other components
The 16-pin connector for the graphics card delivers up to 600 W over a single cable and meets PCIe 5.1 requirements. The panel also has sockets for the motherboard, CPU and PCIe cables, and for peripherals and SATA drives.


Power and efficiency
The full 750 W is available on a single independent +12 V rail, supported by a DC-to-DC converter. With 80 PLUS Gold certification, efficiency is up to 91% according to the manufacturer. Active power factor correction (PFC) reaches up to 99%, and standby consumption is below 0.5 W.

Components and protections
The unit uses Japanese capacitors and has seven protections: over-voltage, over-current, overload, short-circuit, over-temperature, under-voltage and no-load protection. Surge protection withstands pulses of up to 4 kV. At full load the output voltage holds for at least 16 ms after a power cut.

Fan control and airflow
AUTOFAN SPEED MODE only starts the fan once the load reaches 30%. Under higher load, square vents on the top and honeycomb vents on the back carry the heat out.

In the box
- darkFlash PMT750 power supply
- 8 modular cables
- Accessory bag
- 5 cable ties
- 4 mounting screws
- Work gloves
- User manual






Reviews
There are no reviews yet.