Description
Waste set with pop-up knob BLANCO InFino
The waste set BLANCO InFino connects the sink bowl to the drain and has a covered C-overflow, whose opening sits behind a cover in the bowl wall. The finish is matt black (black matt), designed by BLANCO to match its taps and soap dispensers in the same colour.
Compatibility
BLANCO specifies the set for the single-bowl sinks PLEON 6 and 8, ETAGON 6, 500-U and 700-U and SUBLINE 400-U, 500-U and 700-U. The pop-up knob fits a 35 mm hole in the sink or worktop with a mounting thickness of up to 50 mm.
Installation
The strainer is fixed from below with an 8 mm hex key at 1.5–4 Nm and the overflow cover with a PZ 2 screwdriver at no more than 0.5 Nm. The knob nut is tightened by hand and the knob cable connected to the strainer body. The connecting pipes can be shortened with a hacksaw if needed, but each pipe must go at least 15 mm into its fitting.
If the plug does not open or close fully when the knob is pressed, its height can be adjusted. Finally, fill the bowl with water and check that all connections are tight.
Care
The strainer cover and plug are dishwasher-safe. Clean the overflow opening with a brush and the surface with the soft side of a sponge. Chlorine cleaners and the scouring side of a sponge are not suitable for the surface. Keep pots from dropping onto the strainer cover.
In the box
- BLANCO InFino waste set, 1 pc
- 3½″ InFino basket strainer and strainer cover
- Pop-up knob with cable
- Overflow and overflow cover
- Connecting pipes


Reviews
There are no reviews yet.