Description
Graphics card with the NVIDIA GeForce RTX 5060 Ti graphics processor
The Gainward GeForce RTX 5060 Ti Ghost is a dual-fan graphics card whose NVIDIA GeForce RTX 5060 Ti graphics processor uses 8 GB of GDDR7 memory over a 128-bit bus. Memory bandwidth is up to 448 GB/s. The graphics processor has 4608 CUDA cores with a base clock of 2407 MHz and a boost clock of 2572 MHz. The card connects to the motherboard through a PCI Express 5.0 interface and supports DirectX 12 Ultimate, OpenGL 4.6 and NVIDIA G-SYNC. Drivers are available for 64-bit Windows 10 and Windows 11, and Linux is also supported.
Dimensions, power and display outputs
The card is 262.1 mm long, 126.3 mm high and 40.1 mm thick, and takes up two expansion slots in the case. Auxiliary power comes through one 8-pin connector; the card’s TDP (thermal design power) is 180 W and the recommended power supply 600 W. Monitors connect through three DisplayPort 2.1b outputs and one HDMI 2.1b output; the maximum resolution is 7680 × 4320.
Installation
- Disconnect the computer from mains power.
- Remove the covers of two expansion slots at the back of the case by undoing their screws.
- Push the card into the motherboard’s primary PCI Express x16 slot and fix its bracket with the screws you removed.
- Connect the power supply’s 8-pin cable to the connector on the top edge of the card.
- Download the NVIDIA App from the NVIDIA website and install it.
With the Gainward EXPERTool software you can monitor the graphics processor’s temperature and set a frame rate target.










Reviews
There are no reviews yet.