Description
Smartphone gimbal with a built-in extension rod
The 3-axis gimbal AOCHUAN Smart X2 carries a smartphone 55–90 mm wide weighing up to 330 g. You can shoot with the phone’s standard camera, and the AOCHUAN app adds smart tracking and gesture control.


Three axes and four operating modes
The motors on three axes smooth out shake from walking and running. In F mode the phone follows the handle sideways and up and down, while in POV mode it follows in every direction through 360°. DM mode turns the phone 180° and back automatically, and in S mode the motors are stronger than in F mode and suit fast scene changes.

Control buttons and wheel
A click on the M button switches between F and POV, a double click recentres the phone, a triple click starts DM mode and holding the button engages S mode. The shutter button takes a photo or starts a video, a double press turns the picture to portrait or landscape, and the joystick points the phone. Connected to the app, the wheel changes zoom and focus, and a double click on it makes an automatic 280° rotation shot.

Extension rod and desktop tripod
The extension rod hidden in the handle pulls out and bends to the angle you need to shoot from high or low. The desktop tripod screws into the 1/4-inch thread in the base of the handle.


Getting started
Charge the battery fully before first use with the included or any other USB-C cable. Unfold the arm into a 7 shape with the phone clamp at the top, insert the phone and slide it roughly to the centre. A long press on the power button switches the gimbal on; then pair the phone over Bluetooth with SMART_X2. With its high-torque motors, rough balance of the phone is enough.

Folding and storage
Fold the gimbal while it is switched off and the extension rod is fully retracted: fold the holder down until both latches engage. Folded, it measures 165 × 110 × 53 mm and fits in a bag or backpack. If folded while switched on, the gimbal turns itself off after 5 minutes.

Battery and charging
With two 800 mAh, 7.4 V lithium-ion batteries the gimbal lasts 8–10 hours in standby. A full charge at 5 V / 1.5 A takes about 2 hours. A green indicator means 20–100% charge, red under 20% and flashing red charging. The operating temperature is −10 °C to 55 °C.
In the box
- Gimbal AOCHUAN Smart X2, 1 pc
- Desktop tripod, 1 pc
- USB-C charging cable, 1 pc
- User manual, 1 pc





Reviews
There are no reviews yet.