Description
Monitor mount with a short upper arm and manual height adjustment
The Neomounts NEXT Lite DS60-425BL1 monitor desk mount holds one 17-27″ monitor weighing up to 8 kg with a 75 × 75 or 100 × 100 mm VESA hole pattern. The short T-Rex® upper arm needs little depth in front of a wall or partition, so the screen can sit further away from you and more of the desk stays free for work.
Screen position adjusts by hand
You change the screen height on the pole, and the two-part arm moves in depth, so the monitor can be pulled closer or pushed towards the wall. On the jointed VESA plate the screen can be tilted, swivelled and rotated. If the screen does not stay in the chosen position, tighten the joint screw with the supplied hex key.
Cables run under the arm
The lower edge of the arm has a removable cable cover under which you route the cables to the screen, and a cable clip holds them on the pole.
Installation with a desk clamp or grommet
The pole can be fixed with the clamp to the desk edge or with the grommet through the desktop, using an existing Ø 10–60 mm hole or a drilled Ø 10 mm hole. Screw two bolts into the monitor’s upper VESA holes leaving a 3 mm gap, hang the screen on the Easy-release VESA plate and fit the two lower bolts.
In the box
- Monitor mount Neomounts DS60-425BL1, 1 pc
- Pole, two arm sections and VESA plate
- Desk clamp
- Grommet mount
- Cable clip
- 3 M6 × 16 screws
- Monitor screws M4 × 12 and M5 × 12, 4 of each, and 4 D5 washers
- 4 mm hex key











Reviews
There are no reviews yet.