Description
PLA filament for tougher printed parts
SUNLU PLA+ is a PLA filament with an improved formula, and parts printed with it break less often than standard PLA. Notched Izod impact strength is 10 ± 3 kJ/m² and tensile strength 46 ± 5 MPa.

Consistent diameter and good flow
The diameter stays within ±0.02 mm, and good flow keeps the risk of nozzle clogs low.

Neatly wound spool
Compact, orderly winding keeps the filament free of knots and tangles while printing. The spool is detachable and reusable.

Print settings
At 50–100 mm/s the recommended nozzle temperature is 205–215 °C, at 100–200 mm/s 215–245 °C. The bed temperature is 50–60 °C, and the manufacturer recommends a textured PEI (polyetherimide-coated) build plate that needs no treatment. The cooling fan stays on during printing, retraction distance is 0.8–1.2 mm at 30–40 mm/s, and PVA can be used as support material.

Storage
Keep the spool in a cool, dry, well-ventilated place, away from sunlight, open flames and heat sources.






Reviews
There are no reviews yet.