Description
EV charger for home and travel from an ordinary socket
The portable EV charger dé deM2D03B20A_DL charges from a single-phase supply at up to 3.7 kW and has a 20 m cable with a Type 2 connector. It works in Mode 2: the control module built into the cable manages the charging current and protection, so it plugs into an ordinary socket with its Schuko plug. The actual charging speed also depends on the car’s onboard charger and the house fuse.
Charging current chosen to suit the house wiring
With the touch button you select 6, 8, 10, 13 or 16 A, and in the app the current can be changed steplessly from 6 to 16 A. A lower current reduces the load on the wiring when other appliances are running in the house.

App, schedule and delayed start
You control the charger with the button on the control module or from the app. With the schedule and delayed start charging begins at your chosen time. The display shows the charger’s operation, and a three-colour indicator shows power, charging and fault status.

Residual current protection and temperature monitoring
The charger has Type A 30 mA residual current protection and 6 mA DC leakage protection. It monitors overvoltage and undervoltage, overload, protective earth (PE) continuity and relay operation, and stops charging if the relay contacts have welded. Temperature sensors sit in the mains plug and by the relay: above 70 °C the charger limits the current to 6 A and above 75 °C it stops charging.


Use indoors and outdoors
The control module’s IP66 rating means it is dust-tight and protected against powerful water jets, so the charger can be used outdoors. Operating temperature is -25 to 50 °C and the control module measures 176 × 93 × 49 mm.

In the box
- Portable EV charger dé deM2D03B20A_DL, 1 pc

Reviews
There are no reviews yet.