LED mirrors
Choosing an LED mirror for the bathroom: size, light and moisture protection
An LED mirror is a mirror with built-in lighting, where the light is fitted into or behind the mirror, so no separate lamp is needed above it. The range includes LED mirrors from House Nordic and Adler. The purchase depends on the width and height of the mirror, where the light sits and what tone it gives, and whether the mirror suits a damp bathroom.
Width and height: measure the basin and the wall
A bathroom mirror is usually the same width as the basin or slightly narrower. A mirror 40-60 cm wide suits a small basin, and a mirror 80-120 cm wide suits a double basin or a long countertop. Also measure the free height of the wall from the tap up to the ceiling or shelf. A rectangular mirror gives the largest reflective surface, while a round or oval mirror suits a narrower basin. You can filter by Width and Height to find the right size.
Light: front or back lighting and colour tone
On a mirror with front lighting, the light shines through the frosted strip on the mirror surface and lights your face directly, which suits make-up and shaving. A mirror with back lighting casts light onto the wall and gives a soft background glow. The colour tone is shown by the colour temperature: 3000 K is warm white, 4000 K is neutral and 6000 K is cool white.
Moisture protection and heating
For a basin in the bathroom, choose a mirror with moisture protection of at least IP44. A heated mirror has a heating film behind the glass, which keeps the glass clear of fog after a shower. Moisture protection and heating are stated on the product page.
Connection: plug or fixed connection
A plug-in LED mirror is connected to an earthed socket that is protected by a residual current device (30 mA) in the bathroom. A mirror without a plug is connected with a cable from the wall, and this connection is made by an electrician. Before buying, check where the power cable or socket is, because the cable will be behind the mirror. Mirrors without lighting can be found in Wall and floor mirrors.
Frequently asked questions
The centre of the mirror usually sits about 150-165 cm above the floor, so that both the taller and the shorter members of the household can see their face. The bottom edge should be at least 10-20 cm above the tap, so that splashes do not reach the mirror.
Above a basin, choose a mirror with moisture protection of at least IP44. Stricter requirements apply close to a shower or bath, and an electrician will choose the location.
The heating film of a heated mirror warms the glass, so steam does not condense on it. The heating switches on with the light or from a separate switch, as stated on the product page. A working bathroom ventilation system also reduces fogging.
For make-up and shaving, a neutral white of about 4000-5000 K suits best, because it shows skin tone close to daylight. For more precise colour, look for light with a colour rendering index of at least Ra 80.
A plug-in mirror connects to an earthed socket, and in the bathroom the socket must be behind a residual current device. A mirror without a plug needs a power cable from the wall, connected by an electrician.
-
-
Original price was: 248,99 €.199,99 €Current price is: 199,99 €.
- Width
- 4 cm
-
Original price was: 229,99 €.183,99 €Current price is: 183,99 €.
- Width
- 4 cm
-
-
-
-
-
All products shown.