Lighting accessories
Lamp cover, lamp shade and LED power supply: suitable model, size and voltage
The lighting accessories page offers replacement lamp shades and glass lamp covers, as well as LED power supplies for LED lighting. When buying a cover, check that it fits your light fitting; when buying a power supply, check the voltage and wattage. The range includes products from Activejet, Cama MEBLE and Maclean.
Lamp shade or cover
A lamp shade and a lamp cover direct and diffuse the light from the bulb. A white opal glass cover spreads the light evenly and does not dazzle, while a fabric or paper shade gives a softer and warmer light. Glass tolerates heat well and is easy to clean with a cloth, which is why it is used in ceiling and wall lights as well as office and table lamps.
Suitable models: replacement cover for a specific light
Some covers are made for a particular lamp series, such as the Activejet EMILY and ALMA glass covers. In that case the name of the lamp is given in the product name and in the Suitable models filter. A universal shade attaches around the bulb socket, usually with an E27 or E14 ring.
Measure before you buy
Measure the fitting opening of the old cover, meaning the neck diameter, the largest diameter of the cover and its height. The neck diameter must match the lamp holder, otherwise the cover will not stay in place under the screws or clamp. The cover size is given in the product name and on the product page.
LED power supply: voltage and wattage
An LED power supply converts the 230 V mains voltage to the low voltage used by LED strips or furniture lights, usually 12 V or 24 V. The voltage of the power supply must match that of the light. To find the wattage, multiply the watts per metre of the strip by its length and add a reserve of about 20%. You will find strips and furniture lights on the LED strips and furniture lights page.
Colour
A white cover leaves the tone of the light unchanged, while a cream cover gives a warmer tone. You will find complete light fittings on the Ceiling lights and Table lamps pages.
Frequently asked questions
Look at the base of the lamp or in the user manual for the model name, and compare it with the Suitable models filter. If there is no name, measure the neck diameter and height of the cover and compare them with the dimensions on the product page.
A universal lamp shade attaches to the socket ring and fits the socket stated in the product name. E27 is a large and E14 a small screw socket; a shade with one socket ring does not fit the other.
Multiply the wattage per metre of the strip by its length and add about 20% reserve. For example, a 5 m strip rated at 7.2 W/m needs a power supply of at least 45 W.
The strip and the power supply must have the same voltage. A 12 V strip needs a 12 V power supply, and a 24 V strip needs a 24 V power supply; the voltage is marked on the label of the strip and the power supply.
An IP20 power supply is designed for dry indoor rooms. A power supply with an IP rating of at least IP44 is suitable for a bathroom, and IP65 for outdoor use and places exposed to direct water.
Let the bulb cool, remove the cover and wash it in warm water with washing-up liquid. Dry the cover completely before putting it back.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
77,99 €
- Product type
- Lampshade or dome
-
-
-
-
30,99 €
- Product type
- Lampshade or dome
All products shown.
Best sellers
-
12,49 €
- Product type
- Lampshade or dome
- Compatibility
- Lamp EMILY/ALMA