Description
The AVATTO ZWSMMD-4-250V 4‑channel ZigBee switch module with a potential-free contact for flexible smart home control
If you need precise and safe switching of several circuits in one compact device, the AVATTO ZWSMMD-4-250V 4‑channel ZigBee switch module with a potential-free contact is a practical solution. Dry contact relays separate the control signal from the power circuit, which suits switching lighting, automation and control systems well. The Zigbee 3.0 connection and smart app support allow you to set up schedules, groups and remotely controlled scenarios. Each channel withstands a load of up to 10 A, to cover ordinary smart home use cases.
Main features
- 4 channels for independent switching, to divide lighting or devices into zones and reduce wiring complexity.
- A load capacity of 10 A/channel allows typical light and automation circuits to be switched safely, keeping the system reliable.
- A potential-free contact ensures electrical isolation between the control signal and the power circuit, suiting both low-voltage control and switching an input signal.
- Zigbee 3.0 fast and stable communication in the smart home network, works in the Avatto and Tuya Smart Life apps.
- AC 85-250 V or 5 V USB‑C power gives installation freedom both in a junction box and near the devices.
- Schedules and automation with a timer, a counter, a sunrise mode, and cyclic and random switching to support everyday routines.
- 433 MHz radio signal support allows, depending on the setup, switching from a remote.
- Device sharing and groups simplify shared control of the whole home and the creation of scenes.
Safe switching with a potential-free contact
The AVATTO ZWSMMD-4-250V uses a dry contact that separates the control from the power circuit. This suits the precise triggering of lighting, gates, controllers and other automation devices, helping to reduce interference and raise reliability. Each of the four channels is independent and allows flexible installation and expansion of the system.
Stable communication and control from the app
The device works on the Zigbee 3.0 protocol, ensuring fast communication in the smart home network. Compatibility with the Avatto and Smart Life app allows you to switch channels, set up schedules and monitor the status also away from home. For ordinary remote control a compatible Zigbee gateway is needed, which connects the module to the internet.
Automation, schedules and sharing
The module supports sharing the device with other users, grouping, a counter and cyclic operation. You can create sunrise or random scenes that give the impression that someone is at home, and fit the switching to your routine. All four channels can be managed separately in the app for convenient everyday use.
Compatibility and power in a smart home ecosystem
The AVATTO ZWSMMD-4-250V is compatible with the Avatto and Tuya Smart Life platform, which means a wide choice of automation rules and scenes and the option of combining it with other Zigbee devices. For remote control and automation a Zigbee gateway, which connects to the home internet network, is normally needed.
For power you can use either alternating current in the range AC 85-250 V or a 5 V USB‑C input. The switching contact is potential-free, so it suits transmitting a signal and controlling low-voltage circuits. If you plan to switch mains or higher voltage, check the exact voltage rating of the contacts in the manufacturer’s documentation first, because there may be contradictions in different sources.
Installation and usage recommendations
Install the module in a dry and ventilated place with access to power and wires. Choose the power method according to the installation location, connect the loads to the corresponding relay outputs and check that the load does not exceed 10 A/channel. Observe the polarity in low-voltage circuits and use proper wires.
For pairing, switch on pairing mode on the Zigbee gateway and add the device to the Avatto or Smart Life app. Then create groups, schedules, counters or scenes and, if necessary, share the device with other family members. In the case of the mains and permanently installed wiring, we recommend that the installation is carried out by a qualified electrician.
Included in the set
- AVATTO ZWSMMD-4-250V 4‑channel ZigBee switch module with a potential-free contact
- User manual
Take smart switching to the next level
Choose the AVATTO ZWSMMD-4-250V if you want to manage up to four circuits with one device, keep control signals separate from the power circuit and automate switching through the app. The Zigbee 3.0 network and schedules help save time and reduce manual intervention, making the system more reliable and everyday use more convenient.

Reviews
There are no reviews yet.