Smart home accessories
Smart home accessories: junction box, terminals, power and solar panel
Here you will find waterproof junction boxes, DIN rail terminals, power adapters, extension cables and solar panels from Sonoff, Shelly and SwitchBot. With them you install a smart relay, sensor or battery-powered device and power it. We sell smart home accessories. Two things decide the purchase: whether the accessory fits the device’s dimensions and plug, and whether it can withstand the humidity of the installation location.
Mounting parts: waterproof junction box and terminals
A waterproof junction box protects a smart relay and wire connections outdoors, in a garage, cellar or greenhouse. For outdoor use choose a box with an IP rating of at least IP65: IP66 also withstands strong water jets, IP67 short-term and IP68 longer submersion. A relay mounted in the electrical cabinet clips onto a 35 mm DIN rail, where quick-connect terminals join the wires without screws.
Adapter and extension cable
The power adapter must match the device’s voltage and plug, both of which are listed on the device’s product page. An extension cable adds length, for example between a solar panel and a device, when the panel must be in the sun and the device in shade.
Solar panel for a battery-powered device
A solar panel charges the battery of a battery-powered device, such as a curtain motor, smart lock or outdoor camera, so the device does not have to be taken down for charging. The panel works best facing south and in direct sunlight; in shade it produces several times less energy.
What to measure and check before buying
For a junction box, measure the relay and leave room in the box for wires and cable entries. For terminals, check the wire cross-section and permitted current; for the adapter and solar panel, check the plug type (USB-C, micro-USB or the manufacturer’s own plug). You will find smart relays under Smart switches and relays and curtain motors under Curtain motors and roller blind switches.
Frequently asked questions
For outdoors and damp rooms, choose a junction box with an IP65 rating or higher. The first digit of the IP code indicates protection against dust, the second against water: IP65 withstands water jets from any direction, IP67 short-term submersion. A box in direct sunlight must be made of UV-resistant material.
Small smart relays, such as the Shelly 1 or Sonoff MINI, fit in a standard 60 mm flush box behind a switch if the box is deep enough. If the box is shallow, replace it with a deeper one or install the relay in a separate junction box.
Connecting wires to the 230 V mains is electrical work, which must be done by an electrician. This also applies to the junction box and DIN rail terminals. You can connect the plug-in adapter and solar panel yourself.
A solar panel also charges in winter, but less because of the short days and low sun. In the dark, charge the device’s battery from a charger when needed.
Junction boxes, DIN rail terminals and extension cables fit devices from different manufacturers if the dimensions and plug match. Solar panels and adapters are usually made for devices from a specific manufacturer; compatible models are listed on the product page.
-
-
19,95 €
- Product type
- Solar panel
-
4,95 €
- Product type
- Fastening component
-
8,95 €
- Product type
- Fastening component
-
0,95 €
- Product type
- Adapter
-
1,95 €
- Product type
- Fastening component
All products shown.
Popular right now
-
4,95 €
- Product type
- Fastening component