Description
PC case with an acrylic side panel for ATX motherboards
The darkFlash Aquarius Acrylic PC case is a Midi Tower that takes an ATX, Micro-ATX or Mini-ITX motherboard. It is 36.5 cm deep, 19.2 cm wide and 45 cm high and weighs 3.18 kg.

Room for the graphics card, cooler and drives
The case takes a graphics card up to 330 mm long and a CPU cooler up to 160 mm high. The power supply mounts at the bottom, and seven expansion slots take add-in cards. A separate drive cage holds three hard drives, and there are mounts for two 2.5-inch SSDs.
Fan positions and liquid cooling
The front takes three 120 mm fans or a liquid cooler with a 240 mm radiator. There are also two fan positions in the top, one at the rear and two on the PSU shroud. Air enters at the front and over the PSU shroud and leaves through the top and rear.

Acrylic side panel and top dust filter
The side panel is clear acrylic, so lit components stay visible. The front panel is plastic with a diamond-cut pattern. The top has a magnetic dust filter that comes off for cleaning.


Top panel ports
The top panel holds one USB 3.0 and two USB 2.0 ports, headphone and microphone jacks, and power and reset buttons.

Installation
Undo the side panel screws first; the front panel comes off once both side panels are removed. The power supply goes in with its fan over the cooling hole in the case floor. For the graphics card, remove the slot cover and fix the card with the same screw. Align the hard drive with its mount and fix it with screws.
In the box
- PC case darkFlash Aquarius Acrylic, 1 pc
- Motherboard screws, 12 pcs
- Iron motherboard studs, 2 pcs
- Power supply screws, 6 pcs
- Hard drive screws, 4 pcs
- Long fan screws, 8 pcs






Reviews
There are no reviews yet.