Description
Cordless grass shears with two interchangeable blades for lawn and hedge
These two-blade cordless grass shears cut lawn edges and sprouts with the grass shear blade and hedges with the hedge trimmer blade. The blade is changed without tools. Two moving blades cut with a scissor action, and their nickel-plated surface reduces staining and rust.
Cutting grass and cutting height
The cutting height can be set to three levels, 15, 20 or 25 mm, by moving the grass guide; without the guide the cutting height is about 10 mm. The base of the tool rests on the ground while cutting, and the tool is moved forward gently. Long grass is cut down in several stages.
Using it as hedge shears
The hedge trimmer blade cuts branches up to 10 mm thick; cut thicker branches first with branch cutters to 10 cm below the desired cutting height. Hold the tool in one hand, tilt the blades towards the cutting direction and move them at 3–4 seconds per metre. Cut a hedge side from the bottom up, and for an even top, stretch a string at the desired height and cut along it.
Starting and protection functions
The tool starts when you press the lock-off button from the right or the left and pull the trigger, and stops when you release the trigger. Automatic overload, overheat and overdischarge protection stops the motor, and an indicator lamp shows a low battery or overload.
Cleaning and care
Oil the blades with low-viscosity machine oil before work and once an hour during work. After work, clean both sides of the blades with a wire brush, wipe them and oil them again. Wipe the housing with a dry cloth or one dampened in soapy water and wrung out. A hole in the base lets you hang the tool on the wall for storage with the blade cover fitted.
In the box
- Makita UM600DZX cordless grass shears with grass shear blade
- Hedge trimmer blade with blade cover





Reviews
There are no reviews yet.