Description
Aquarium water pump with filter sponge and aeration
The built-in filter sponge of the aquarium water pump catches floating debris and fine particles in the water. The body and all external parts are made of corrosion-resistant material, so the pump can be used in salt, acidic and alkaline water. The pump is designed for freshwater and seawater aquariums.

Adjustable aeration and removable filter cover
The XQP-500F has an aeration system consisting of an aeration control valve, an air outlet nozzle and a connection flange. With the control valve you can change the direction and strength of the air flow. The filter cover can be removed or set according to the water depth, so the device can be used as a whole or in parts. You can choose the filter material yourself.

Installation
The pump stands on a base plate with suction cups and must be fully under water before it is started. Connect the power only once installation is complete. The air outlet nozzle is removable: if it does not stay in the correct position after installation, take it off, set it in the correct position and refit it to the connection flange.
Cleaning and maintenance
Clean the rotor shaft and rotor chamber regularly, and clean or replace the filter sponge so that filtration stays effective. To reach the filter sponge, turn the air outlet nozzle off in the direction of the arrow, pull it off the connection flange, press the sieve locking tabs and pull the sieve down. To reach the rotor, slide out the pump base plate, turn the rotor cover off and remove the magnetic rotor for cleaning or replacement.

Included in the set
- Water pump with filter sponge, sieve and sieve cover
- Aeration control valve, air outlet nozzle and connection flange
- Base plate
- Suction cups



Reviews
There are no reviews yet.