Aquarium pumps
Choosing an aquarium pump: pump type, flow rate and lift height
An aquarium pump moves water: it takes it through the filter, mixes the aquarium water or lifts it to an external filter and fountain. The range includes Sunsun water pumps, circulation pumps and internal filters. Your choice depends on the pump type, the flow rate in litres per hour and the lift height in metres.
Water pump, circulation pump or internal filter
A water pump is a submersible pump installed under the water that pushes the water into a hose: to an external filter, a sump, a fountain or for water changes. A circulation pump is attached to the aquarium wall and creates a current that carries dirt towards the filter and also moves water in the corners. An internal filter has the pump and filter sponge in one housing, and it cleans the water directly in the aquarium.
Flow rate: how many litres per hour
The flow rate shows how many litres of water the pump moves per hour (l/h). For a filter pump, a common rule of thumb is that the aquarium water should pass through 3-5 times per hour: a 100-litre aquarium suits about 300-500 l/h. In a reef aquarium, circulation pumps move water 10-20 times per hour, and for small fish and shrimp a pump with adjustable flow is suitable.
Lift height: measure the difference from the pump to the outlet
Lift height (Hmax) is the greatest height to which the pump can raise water, and at this height the flow rate drops to zero. If the pump raises water, measure the height from the pump’s position to the outlet and choose a pump whose lift height is comfortably higher, because height and a long hose reduce the flow rate. Also check the pump outlet diameter so that the hose fits the nozzle.
Power and extra features
An aquarium pump runs around the clock, so its power determines the electricity cost: a 10 W pump uses about 88 kWh per year. With a pump that has adjustable flow, you can reduce the flow with a knob. A pump with air intake draws air in at the outlet and mixes air bubbles into the water without a separate air pump. You will find filter sponges and external filters on the page Aquarium filters.
Frequently asked questions
The flow of a filter pump should be 3-5 times the aquarium volume per hour, for example 600-1000 l/h for a 200-litre aquarium. If the pump raises water, take the lift height into account, because it reduces the actual flow rate.
A filter pump pushes water through filter material that catches dirt. A circulation pump moves water inside the aquarium and directs dirt towards the filter, which is why it is used together with a filter.
A submersible pump must run completely under water, because the water cools the motor and lubricates the rotor bearing. Monitor the water level, because through evaporation the pump may end up above the water surface.
A pump that moves the water surface improves gas exchange, because oxygen dissolves into the water through the surface. A pump with air intake also adds air bubbles to the water. In a densely stocked aquarium, an air pump and air stone are also used.
A submersible pump is suitable for an indoor fountain if its lift height exceeds the height of the fountain. For outdoor use, check the product page to see whether the pump is designed for outdoor conditions.
Unplug the pump, open the housing and rinse the rotor and the pre-filter sponge with aquarium water. Clean the pump every 1-3 months or when the flow weakens.
-
11,95 €
- Flow rate
- 4000 l/h
-
7,95 €
- Flow rate
- 2000 l/h
-
9,95 €
- Flow rate
- 500 l/h
- Lifting height
- 0.9 m
-
31,95 €
- Flow rate
- 3500 l/h
- Lifting height
- 3.4 m
-
13,95 €
- Flow rate
- 2500 l/h
- Lifting height
- 2.3 m
-
11,95 €
- Flow rate
- 1500 l/h
- Lifting height
- 1.8 m
-
9,95 €
- Flow rate
- 1000 l/h
- Lifting height
- 1.4 m
-
8,95 €
- Flow rate
- 500 l/h
- Lifting height
- 0.9 m
-
7,95 €
- Flow rate
- 370 l/h
- Lifting height
- 0.7 m
-
7,95 €
- Flow rate
- 250 l/h
- Lifting height
- 0.5 m
-
14,95 €
- Flow rate
- 1600 l/h
- Lifting height
- 1.9 m
-
11,95 €
- Flow rate
- 1000 l/h
- Lifting height
- 1.4 m
-
7,95 €
- Flow rate
- 600 l/h
- Lifting height
- 0.75 m
All products shown.