Description
Dolby Atmos soundbar with subwoofer and rear speakers
In this 9.1-channel Dolby Atmos soundbar the surround channels come from two rear speakers placed behind the listener and the bass from a separate subwoofer. The front speaker has seven 2-inch drivers, the rear speakers two 2-inch drivers in total and the subwoofer a 6.5-inch driver.



Subwoofer and rear speakers
The subwoofer is paired wirelessly with the soundbar at the factory and only needs mains power. The rear speakers connect to the subwoofer with two 6 m cables. To pair again, hold SUB PAIR on the remote for 3 seconds and PAIR on the subwoofer for 5 seconds; the white light stays on once connected.


Setting up on bases, a table or the wall
The centre, left and right sections of the front speaker join into one 107.2 cm wide bar, or the side sections stand upright on the bases beside the TV. For wall mounting, 30 mm deep holes are drilled 991 mm apart with a 6 mm bit. The manufacturer recommends placing the soundbar at or near ear level.

Sound settings with the remote and app
The remote sets bass, mid, treble and surround levels separately and selects six sound modes: movie, music, voice, sport, game and night. The Xupmix button changes rear channel processing: when on, their sound comes from the multichannel signal; when off, from the left and right channels, giving a wider sound field. The ULTIMEA app has a 10-band equaliser and 121 presets. The soundbar goes into standby after 15 minutes without an audio signal, and this time can be changed in the app.

RGB lighting
The remote selects the RGB lighting mode and its brightness, and sets the front display brightness in five steps. The lighting modes include Halloween, Party, Rhythm, Christmas, Movie and Cycle.

Connections
The TV connects via the HDMI eARC port, and with the TV’s CEC function the TV remote switches the soundbar on and controls its volume. Dolby Atmos sound reaches the soundbar from a TV that supports HDMI eARC when the TV’s digital audio output is set to Pass Through. There are also HDMI IN, optical and AUX inputs, a USB port for MP3 files from a memory stick of up to 128 GB and Bluetooth 5.4.
Cleaning and care
Clean the soundbar with a dry, soft, lint-free cloth, without corrosive cleaning agents or oils.
In the box
- three-piece front speaker: centre, left and right sections
- wireless subwoofer and its power cable
- 2 rear speakers and 2 rear speaker cables (6 m)
- 2 bases
- remote control
- power adapter
- HDMI cable, optical cable and 3.5 mm to RCA audio cable
- front speaker connection cables (2 m and 100 mm)
- wall mounting hardware: 6 brackets, 6 screws and 12 wall plugs
- user manual




Reviews
There are no reviews yet.