Description
EV charger for company car parks and larger charging sites
For charging at 1.4–22 kW the NexBlue Delta EV charger has a Type 2 socket (IEC 62196-2), with a charging current of 6 A on one phase up to 32 A on three phases. An electronic lock holds the cable in the socket, permanently if needed. The real charging speed depends on the building’s main fuse and the car’s onboard charger.
Load management for an unlimited number of chargers
Load management can link an unlimited number of chargers at one location, even across floors of a parking garage. Together with the NexBlue Zen unit, dynamic load and phase balancing shares power between the chargers and multi-level load management prevents overloading the electrical system. 1 or 3 CT clamps and an RS-485 interface can be connected to measure the building’s current. A built-in energy meter measures the energy charged to ±1%.
Set-up via NFC, Bluetooth and NexSync
The charger is configured with an NFC tap, the RFID backplate, Bluetooth or online pre-setup. NexSync transfers updated settings locally and automatically to chargers installed later. In the NexBlue Partner app and portal, installers and organisations create locations, configure chargers and export charging data by user, charger or RFID card.
Connectivity, the myNexBlue app and OCPP
The charger connects to the internet over Wi-Fi, Ethernet or a built-in 4G eSIM, and to your phone over Bluetooth (BLE 4.2). Users start charging with the myNexBlue app, an RFID card, phone NFC, Plug & Play or AutoCharge, and the app also schedules charging and shows statistics. The charger connects to service providers’ management platforms via local OCPP 1.6-J and 2.0.1; OCPP is an open protocol between the charger and the platform. The charger is ready for ISO 15118, which enables vehicle-to-grid energy exchange (V2G) and Plug & Charge authentication.
Protection functions and IP54 enclosure
The charger’s built-in residual current protection detects 6 mA DC leakage (RDC-DD, IEC 62955) and protects against 30 mA AC faults (IEC 60947-2, annex M). It also protects against overload, over- and undervoltage, overheating, ground faults and relay welding, and monitors humidity. The plastic enclosure is rated IP54, meaning protection against dust and splashing water from any direction, has an IK10 impact rating and is UV resistant. The charger works at −30 °C to +50 °C and 5–95% humidity.
Installation
The charger is wall-mounted by an electrician, and the wall mounting measures 206 × 130 mm. It suits TN, TT and IT networks, detects the network type itself, and runs at 230 V or 3 × 400 V (±10%) and 50 Hz.
In the box
- EV charger NexBlue Delta, 1 pc

Reviews
There are no reviews yet.