Description
EV charger with a MID meter and a Type 2 socket
With 1.4–22 kW of power the NexBlue Edge Max EV charger charges on 1 or 3 phases via a Type 2 socket (IEC 62196-2), at 6 A on one phase up to 32 A on three phases. The socket’s electronic lock holds the charging cable, permanently if you choose. The real charging speed depends on the building’s main fuse and the car’s onboard charger.
MID-approved energy meter for expense claims
The built-in MID class B energy meter measures the energy charged to ±1% (EN 50470-3:2022); MID is the Measuring Instruments Directive 2014/32/EU and an EU type examination certificate confirms the meter’s conformity. The readings can be used to claim home charging costs from your employer.
Connectivity, the myNexBlue app and starting a charge
The charger connects to the internet over Wi-Fi, Ethernet or a built-in 4G eSIM, and to your phone over Bluetooth (BLE 4.2) for local control. Charging starts from the myNexBlue app, an RFID card, phone NFC, Plug & Play or AutoCharge. In the app you can schedule charging, view charging statistics and history and share access with family and friends. The OLED display shows charging data in real time.
Load management, OCPP and V2G readiness
Load management shares power between up to 5 chargers at one location, and 1 or 3 CT clamps and an RS-485 interface can be connected to measure the building’s current. With local OCPP 1.6-J and 2.0.1 the charger connects to charging management platforms; OCPP is an open protocol between the charger and the platform. The charger is ready for ISO 15118, which enables vehicle-to-grid energy exchange (V2G) and Plug & Charge authentication.
Safety and outdoor use
The charger has built-in residual current protection: 6 mA DC leakage detection (RDC-DD, IEC 62955) and 30 mA AC protection (IEC 60947-2, annex M). It also has overload, over- and undervoltage, temperature and ground fault protection plus relay welding protection. The IP54 plastic enclosure is protected against dust and splashing water from any direction, is rated IK10 for impacts and is UV resistant. The charger works at −30 °C to +50 °C and 5–95% humidity.
Installation
The charger is wall-mounted by an electrician, and the wall mounting measures 206 × 130 mm. It suits TN, TT and IT networks, detects the network type itself, and runs at 230 V or 3 × 400 V (±10%) and 50 Hz.
In the box
- EV charger NexBlue Edge Max, 1 pc

Reviews
There are no reviews yet.