Description
Maestro MR-080N electric water boiler and dispenser with three ways to dispense water
Maestro MR-080N electric water boiler has a 4.5 l tank. It boils water, keeps it warm and dispenses hot water in three ways. It suits a kitchen or rest room where hot water is used one cup after another to make tea, coffee or other drinks.
Main features
- Three water dispensing methods: hot water can be released with the electric pump on the control panel, the mechanical pump button on the lid, or by pressing the sensor next to the tap spout with a cup. The cup is filled at the device, and you do not need to lift the filled hot water tank.
- Keeping warm and reboiling: after the water has come to the boil, the device switches to keep-warm mode. The reboil button starts heating again when freshly boiled water is needed for the next drink.
- 4.5 l water tank and water level scale: the scale on the front shows the water quantity without opening the lid. The large tank allows several drinks to be made in succession without frequent refilling.
- Dry heating protection: heating stops automatically when the tank is empty or the water level drops below 0.5 l. Before using it again, unplug the device, let it cool and fill the tank with water.
- Concealed disc heating element: the heating element does not reach the bottom of the tank, so the inner surface is easier to clean. The stainless steel water tank is designed for regular use of hot water.
- 750 W power: the heating element heats the water in the tank, and the device operates on a 220-240 V, 50 Hz AC mains supply.
- 360° swivel base: the device can be turned on its base without lifting it, so the spout stays in a suitable direction during use.
Why dispensing by pump is useful
A 4.5 l water tank becomes heavy when full, and tilting it to pour hot water can be inconvenient. The Maestro MR-080N leaves the tank on the kitchen worktop, because water comes out of the spout on the front through the pump or through the sensor operated by a cup. This solution suits places where cups or small jugs are filled repeatedly over the day.
Placement and maintenance
The device measures 19.8 × 28.5 × 35.8 cm, so allow for both the base dimensions and the height needed to open the lid on the worktop. The power cord is 1.1 m long. To remove limescale, use 20 g of citric acid per litre of water and clean the device at least every 2-3 months, or sooner if limescale forms.



Reviews
There are no reviews yet.