Description
Kettle with an illuminated water level scale
The switch of this beige plastic kettle sits at the top of the handle. When you set it to I, the illuminated water level scale lights up and the water starts to heat. When the water boils, the switch moves to 0, the light goes out and the kettle switches off automatically; you can stop heating at any time by pressing the switch.
Use
Before first use, remove the packaging and stickers, check that the kettle, base, power cord and plug are undamaged, and unwind the cord fully. Place the base on a dry, level and stable surface; on heat-sensitive surfaces an insulating heat mat is recommended. Fill the jug, lifted off the base, with cold water between the MIN and MAX marks and close the lid until it clicks. Discard the water from the first boil and boil again.
If the kettle is empty or the water is below the MIN mark, a safety device switches it off: unplug it, let it cool, fill it with water and switch it on again. If the lid is open while boiling, the kettle does not switch itself off. If it switches off before the water boils, descale it. Do not fill the kettle with cold water before it has cooled.
Cleaning and care
Clean the kettle and the filter at least twice a year, and unplug the kettle and let it cool before cleaning. Clean the limescale filter with a nylon brush under running water; a heavily soiled filter can be soaked in vinegar or descaler first. To descale, fill the kettle to the max mark with a mixture of one part vinegar and two parts water, boil it, leave it for 10–12 hours and pour it out, then boil clean water and pour that out too. For routine cleaning, wipe the body inside and out with a soft damp sponge or cloth, with soapy water if needed, then rinse and dry.
Let the kettle cool completely before storing it and do not wind the power cord around it while it is still warm.
In the box
- kettle
- base with power cord






Reviews
There are no reviews yet.